43-789.fm Page 11 Monday, August 16, 1999 8:32 AM
4.Insert the supplied AC adapter’s barrel plug into the DC 12V jack on the back of the base.
5.Route the modular cord through ei- ther groove on the right bottom of the base and the adapter cord through the groove below the strain relief slot.
Strain
Relief
Slot
6.Insert the tabs on the narrow end of the bracket into the inner pair of slots near the top of the base as shown and snap the tabs at the wide end of the bracket into place.
7.Align the keyhole slots with the mounting screws and slide the base downward to secure it.
8.Plug the adapter into a standard AC outlet. The message counter counts down from 18 to 00 and the TAD- 1029 beeps.
9.Plug the end of the modular cord into a modular phone line jack.
10.Fully extend the base’s antenna and place it in a vertical position.
11
