8.Plug the AC adapter into a standard AC outlet. The message counter counts down from 18 to 00 and the
9.Fully extend the base’s antenna and raise it to a vertical position.
1.Drill two holes 315/16 inches (100 mm) apart. Then thread a screw into each hole, letting the heads ex- tend about 3/16 inch (5 mm) from the wall.
3/16"
315/16" |
2.Remove the mounting bracket by holding in both tabs and gently pull- ing out the wide end of the bracket.
Mounting the Base Directly on the Wall
To mount the base directly on the wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.
10
3.Plug one end of the supplied long modular cord into the telephone jack on the back of the base.
