Q-Logic ISR6142 manual Install the Transceivers, Connect the Management Workstation to the Router

Page 51

A

4 – Installation iSR6142 Router Installation

Install the Transceivers

The router supports a variety of SFP transceivers.

„To install a transceiver, insert the transceiver into the port and gently press until it snaps in place.

„To remove a transceiver, gently press the transceiver into the port to release tension, then pull the release tab or lever and remove the transceiver. Different transceiver manufactures have different release mechanisms. Consult the documentation of your transceiver.

NOTE:

The transceiver fits only one way. If the transceiver does not install under gentle pressure, flip it over and try again.

Connect the Management Workstation to the Router

You can manage the router using the SANsurfer Router Manager or the command line interface (CLI). The SANsurfer Router Manager requires an Ethernet connection to the router. The CLI can use an Ethernet connection or a serial connection. Choose the router management method, then connect the management workstation to the router in one of the following ways:

„Indirect Ethernet connection from the management workstation to the router RJ-45 connector through an Ethernet switch or hub. This requires a 10/100 Base-T straight-through cable.

„Direct Ethernet connection from the management workstation to the router RJ-45 Ethernet connector. This requires a 10/100 Base-T crossover cable.

„Serial port connection from the management workstation to the router RS-232 serial port connector. This requires a 10/100 Base-T straight-through cable and an RJ45-to-DB9F adapter (included with the router).

Configure the Management Workstation

The router comes from the factory with a default IP address (10.0.0.1). Prior to product installation, follow the procedures based on your configuration method:

„If you plan to configure the router through the management Ethernet port (using the GUI or CLI via telnet), you must initially configure the workstation as described in “Setting the Workstation IP Address” on page 4-6.

„If you plan to configure the router using the management COM port, configure the workstation as described in “Configuring the Workstation Serial Port” on page 4-6.

SN0051102-00 A

4-5

Image 51
Contents ISR6142 Intelligent Storage Router Document Revision History Table of Contents Planning Installation Removal/Replacement List of Figures ISR6142 Intelligent Storage Router Installation Guide Related Materials Intended AudienceSafety Communications Statements Federal Communications Commission FCC Class a Statement CE Statement Laser Safety Information Electrostatic Discharge Sensitivity Esds PrecautionsVcci Class a Statement Preamble Accessible PartsLicense Agreements General Public LicenseIntroduction General Public License Introduction General Public License Introduction General Public License Introduction General Public License No Warranty Copyright C yyyy name of author How to Apply These Terms to Your New ProgramsTechnical Support AvailabilityTraining Support Headquarters Contact InformationGeneral Description Licensed Features Router CapabilitiesSmartWrite Additional Server/Ports Remote SAN Island Connectivity Remote SAN Island ConnectivityLocal SAN Island Connectivity Local SAN Island Connectivity Fcip Fibre Channel over IPChassis LEDs Chassis Controls Input Power LED GreenSystem Fault LED Amber System Fault LED Blink PatternsReset a Router Maintenance ButtonFibre Channel Ports Enable DhcpPort LEDs Fibre Channel Port LEDsFibre Channel SFP Transceivers Ethernet Port Management ISCSI/Gigabit Ethernet Port LEDsSerial Port Serial Port Pin IdentificationRJ-45 to DB-9 Adapter Pin Identification DB-9F Devices PlanningISCSI Device AccessFC Performance Fibre ChannelLatency ISCSI/Gigabit Ethernet PerformanceDistance BandwidthT1 / DS-1 1.554 Mbits/Sec Performance TuningDS-5 400 Mbits/Sec T3 / DS-3 45 Mbits/SecOC-3 150 Mbits/Sec OC-1 50 Mbits/SecOC-12 and Above 621 Mbits/Sec TopologyMultiple Routers Fibre Channel Switch Ports and Zoning RequirementsManagement RecoverySecurity ServicesSite Requirements Management WorkstationManagement Workstation Requirements ISR6142 Router Installation Power RequirementsEnvironmental Conditions ISR6142 Router and Accessories Pre-installation Check List Pre-installation ChecklistMount the Router Install the Transceivers Configure the Management WorkstationConnect the Management Workstation to the Router Setting the Workstation IP Address Select the Intelligent Storage Routers icon Install the SANsurfer Router ManagerStart the SANsurfer Router Manager Linux InstallationDemko Connect the Router to AC PowerTelnet 10.0.0.1 username guest password Configure the RouterFirmware Installation Using the SANsurfer Router Manager to Install FirmwareCable Devices to the Router Type set to Using the CLI to Install FirmwareImage unpack isr-6142-220x.bin Installation Firmware Installation SN0051102-00 a Chassis Diagnostics Diagnostics TroubleshootingPower-On Self-Test Diagnostics Input Power LED is OffSystem Fault LED is On System Error Blink Pattern LED Blink PatternsHeartbeat Blink Pattern Management Port IP Address Conflict Blink Pattern Over-Temperature Blink PatternRecovering a Router Page SFP Transceiver Removal and Replacement Removal/ReplacementRouter Removal and Replacement ReplacementRemoval Informational Log Messages Log DataTable A-1. Application Modules-Informational Log Messages Application ModulesTable A-1. Application Modules-Informational Log Messages Table A-2. iSCSI Driver-Informational Log Messages ISCSI DriverTable A-3. Fibre Channel Driver-Informational Log Messages Fibre Channel DriverTable A-4. User Modules-Informational Log Messages User ModulesTable A-4. User Modules-Informational Log Messages Table A-5. FCIP-Informational Log Messages FcipTable A-7. System-Informational Log Messages TOE DriverSystem Table A-6. TOE-Informational Log MessagesTable A-8. Application Module-Error Log Messages Error Log MessagesCapacity Table A-8. Application Module-Error Log Messages Table A-8. Application Module-Error Log Messages Page Log Messages Error Log Messages Page Page Table A-9. iSCSI Driver-Error Log Messages Page Log Messages Table A-10. Fibre Channel Driver-Error Log MessagesTable A-10. Fibre Channel Driver-Error Log Messages Table A-11. User Modules-Error Log Messages Table A-11. User Modules-Error Log Messages Page Table A-12. System-Error Log Messages Fatal Log MessagesTable A-13. iSCSI Driver-Fatal Log Messages Etpassthroughstatus Table A-13. iSCSI Driver-Fatal Log Messages Table A-14. Fibre Channel Driver-Fatal Log Messages FC DriverTable A-14. Fibre Channel Driver-Fatal Log Messages Table A-15. TOE-Fatal Log Messages Table A-16. System-Fatal Log Messages Log Messages Fatal Log Messages SN0051102-00 a Introduction Snmp PropertiesTable B-1. Snmp Properties Table B-2. Snmp Trap Configuration Parameters Snmp Trap ConfigurationSystem Information Management Information Base MIBQsrNwPortEntry Network Port TableQsrIPAddressType QsrNwPortRoleQsrNwPortIndex QsrNwPortAddressModeFibre Channel Port Table QsrFcPortNodeWwn QsrFcPortEntryQsrFcPortRole QsrFcPortIndexSensor Table QsrSensorUnits QsrSensorEntryQsrSensorType QsrSensorIndexQsrSensorState QsrSensorValueQsrUpperThreshold QsrLowerThresholdQsrEventDescription NotificationsNotification Objects QsrEventSeverityFibre Channel Port Down Notification Agent Start Up NotificationAgent Shut Down Notification Network Port Down NotificationGeneric Notification Sensor NotificationPage Index Index-2 SN0051102-00 a Fcip A-8 MIB MIB B-3
Related manuals
Manual 154 pages 40.65 Kb

ISR6142 specifications

The Q-Logic ISR6142 is a state-of-the-art intelligent storage router that plays a crucial role in modern data centers. This high-performance solution has been specifically designed to address the growing demands of cloud computing, big data, and virtualization environments. With its innovative features and technologies, the ISR6142 significantly enhances data management and accessibility while ensuring high throughput and low latency.

One of the standout features of the ISR6142 is its ability to support advanced storage protocols. It seamlessly integrates with various networking protocols like Fibre Channel, iSCSI, and NFS, allowing for versatile connectivity options. This flexibility ensures compatibility with existing storage and network infrastructures, making it an ideal solution for businesses looking to optimize their storage efficiency without overhauling their entire system.

The ISR6142 is powered by cutting-edge data management technologies, including data deduplication and compression. These capabilities help organizations greatly reduce storage space requirements and improve overall efficiency by eliminating duplicate data and minimizing file sizes. This not only saves costs associated with storage but also enhances data transfer rates, enabling faster operations and improved performance.

Scalability is another key characteristic of the ISR6142. It can easily accommodate the growing data needs of organizations by expanding storage capacities and supporting multiple array types. This adaptability allows businesses to scale their storage solutions without major disruptions, ensuring continuous operations even as data volumes increase.

Security is a top priority for any data storage solution, and the ISR6142 excels in this area as well. It incorporates robust security features such as end-to-end encryption and multi-factor authentication, safeguarding sensitive data from unauthorized access and potential breaches. This level of protection is vital for companies that handle critical information and need to comply with various regulatory requirements.

Additionally, the ISR6142 offers comprehensive management tools that provide real-time monitoring and analytics. These tools allow administrators to gain insights into storage performance and health, enabling proactive management and maintenance. The user-friendly interface simplifies operations, making it easier for IT teams to monitor and troubleshoot.

In summary, the Q-Logic ISR6142 storage router is a powerful and versatile solution tailored to meet the demands of contemporary data management. With its advanced protocol support, data efficiency technologies, scalability, robust security measures, and comprehensive management capabilities, the ISR6142 is well-equipped to help organizations tackle the challenges of today’s data-driven landscape. Investing in this intelligent storage router means guaranteeing a more efficient, secure, and scalable storage architecture for any enterprise.