Installation & SET-UP

THE XENON TROUPER is shipped in sections which must be assembled. The Folding Base Stand Assembly 65838 is shipped collapsed, and requires only unfolding and securing the (4) base legs using the T-bolts supplied.

WHEN INSTALLED in a permanent location, the leveling feet must be removed, and the clearance holes in the base leg brackets used for hardware (user supplied) to bolt the base to the floor or platform. If it is desired to have the unit portable, when operating, the leveling feet must be adjusted down until the weight of the spotlight has been shifted from the casters to the leveling feet.

THE INNER TUBE and support yoke has three holes to permit adjusting the height of the spotlight. The three holes are on four inch centers and will allow an optical height of approximately 53 inches, 57 inches, and 61 inches above floor level to the optical center of the lamphouse and lens system. The leveling feet may be adjusted through an additional two inch range. Insert the height location pin through the hole in the outer tube and one of the holes in the inner tube.

THE HORIZONTAL SWING and vertical tilt locking knobs are on the right hand (operating) side of the yoke assembly. Tighten both of these locking devices securely before attempting to place the lamp- house and lens system on the support yoke.

PLACE THE LAMPHOUSE and lens system on the yoke assembly, with the spot size control handle to the right hand (operating) side, the same as the locking controls on the yoke. Line up the four mounting holes in the bottom of the base rail with the four mating holes in the support yoke and secure with the four 5/16-18 wing screws.

ATTACH THE COLOR BOOMERANG to the front of the optical system cover by inserting the hinge pin through the hinge on the boomerang and optical system. Fasten the boomerang yoke to the slotted angle bracket on the underside of the optical system pan. Adjust and securely tighten the wing nut and lock nuts to hold the boomerang parallel with the front of the optical system housing.

ATTACH THE LAMPHOUSE CABLE CONNECTOR to the receptacle on the power supply. Align the pins before tightening the locking ring. Do not energize the xenon power supply before first installing the xenon bulb into the lamphouse.

EARLIER MODELS of Strong xenon spotlights included a heavy-gauge green ground wire in the lamphouse cable assembly. This ground wire was attached to a ground stud connected to the power supply cabinet. Current models of Strong power supplies include a 1/4-20 stud in the cabinet adjacent to the MS connector to allow ground termination of older spotlights.

48057 specifications

Strong Enterprises 48057 is a cutting-edge organization that integrates state-of-the-art technologies and innovative practices to deliver exceptional solutions across various industries. With a focus on enhancing productivity and efficiency, Strong Enterprises offers a diverse range of products and services designed to meet the evolving needs of its clients.

One of the main features of Strong Enterprises is its commitment to research and development. This dedication allows the organization to stay ahead of industry trends and harness the latest technological advancements. The company invests significantly in exploring emerging technologies such as artificial intelligence, machine learning, and the Internet of Things (IoT), enabling it to provide smart solutions that optimize operations and streamline processes.

Strong Enterprises is renowned for its robust software development capabilities. The company offers custom software solutions that are tailored to the specific requirements of its clients. By employing agile methodologies, Strong Enterprises ensures that projects are delivered on time and within budget while maintaining flexibility to adapt to changing client needs. The company’s development team is proficient in various programming languages and frameworks, allowing them to create scalable and secure applications.

In addition to software development, Strong Enterprises provides comprehensive consulting services. The organization’s team of experts works closely with clients to assess their operational needs and identify areas for improvement. By leveraging data analytics and strategic planning, Strong Enterprises helps businesses implement effective solutions that drive growth and enhance decision-making processes.

Strong Enterprises also emphasizes sustainability and environmental responsibility in its operations. The company actively seeks out eco-friendly practices and solutions, ensuring that its technologies contribute to a more sustainable future. This commitment not only aligns with global efforts to combat climate change but also resonates with clients who value environmental stewardship.

Collaboration and communication are integral to Strong Enterprises’ operational philosophy. The organization fosters a culture of teamwork, encouraging cross-functional collaboration among its employees. This not only enhances innovation but also ensures that clients receive well-rounded solutions that address all aspects of their challenges.

In conclusion, Strong Enterprises 48057 stands out as a leader in technological innovation and service excellence. With its focus on research and development, custom software solutions, consulting services, sustainability, and collaboration, Strong Enterprises is well-equipped to meet the dynamic demands of its clients and drive success in the ever-evolving business landscape.