Watt Xenon Bulb Installation | Strong Enterprises 48057 specs

700 WATT XENON BULB INSTALLATION

Type 48057 Trouper

CAUTION: OBSERVE ALL SAFETY PROCEDURES. Put on the protective face mask. Wear clean cotton gloves to prevent marking the quartz envelope of the bulb with fingerprints.

REMOVE THE TOP COVER of the lamphouse by removing the four Holt head (tamperproof) screws with the special screwdriver provided. Loosen the two knurled-head thumb screws (65152) on the front bulb support yoke and pivot the retaining plate (65151) aside. Slide the 65131 clamp on the end of the igniter lead over the brass socket of the rear bulb support collet (65844).

ASSEMBLE THE ADAPTERS to the 700 watt bulb prior to inserting the bulb into the lamp- house. Be very careful not to apply any strain on the quartz envelope when installing adapters. Screw the cathode adapter (65198) onto the threaded negative stud so it seats firmly against the shoulder of the (-) end cap. Slip the 65259 anode adapter over the positive pin up to the shoulder of the (+) end cap. Tighten the set screw (00720) securely to insure a good electrical connection.

Set Screw 00720	Hanovia XH0700HS	Thumb Screw 65152
		Retainer Plate 65151

Anode Clamp 65131

Anode Adapter 65259*

	Clamping Screw 01532	Cathode Adapter 65198
	Clamping Screw 01532
	Rear Bulb Support Collet 65960	Front Bulb Support 65117
	* Use short adapter (65199) with OSRAM bulb	Front Bulb Support 65117
	* Use short adapter (65199) with OSRAM bulb

REMOVE THE PLASTIC PROTECTIVE COVER from the xenon bulb only if necessary. Insert the bulb through the top of the lamphouse, between the reflector support and the front casting. Pass the anode (+) end of the bulb through the hole in the reflector, taking care not to touch the surface of the reflector.

INSERT THE ANODE ADAPTER STEM into the rear support collet. The stem must be inserted as far as possible to permit full focus travel of the bulb. Place the cathode adapter into the 65117 front bulb support, pivot the retaining plate to its closed position, and tighten the (2) thumb screws. Tighten the socket head clamping screw in the anode contact securely to insure a good electrical contact.

INSTALL THE CATHODE LEAD CONTACT over the end of the cathode adapter up to the shoulder of the contact and tighten the clamping screw securely. Lay the lead in front of the air duct to minimize the shadow.

A GLASS STRIP HEAT FILTER is supplied to reduce the thermal energy at the optical sys- tem and color gels. Insert the heat filter in the bracket provided on the inside of the lamphouse at the front opening. Place the filter in position with the coated surface facing the bulb. The coated surface is indicated by a small XX or other marking. This filter is a narrow strip that covers only the center portion of the beam. To prevent damage to optical system components, do not operate the spotlight with the filter removed or reversed.

48057 specifications

Strong Enterprises 48057 is a cutting-edge organization that integrates state-of-the-art technologies and innovative practices to deliver exceptional solutions across various industries. With a focus on enhancing productivity and efficiency, Strong Enterprises offers a diverse range of products and services designed to meet the evolving needs of its clients.

One of the main features of Strong Enterprises is its commitment to research and development. This dedication allows the organization to stay ahead of industry trends and harness the latest technological advancements. The company invests significantly in exploring emerging technologies such as artificial intelligence, machine learning, and the Internet of Things (IoT), enabling it to provide smart solutions that optimize operations and streamline processes.

Strong Enterprises is renowned for its robust software development capabilities. The company offers custom software solutions that are tailored to the specific requirements of its clients. By employing agile methodologies, Strong Enterprises ensures that projects are delivered on time and within budget while maintaining flexibility to adapt to changing client needs. The company’s development team is proficient in various programming languages and frameworks, allowing them to create scalable and secure applications.

In addition to software development, Strong Enterprises provides comprehensive consulting services. The organization’s team of experts works closely with clients to assess their operational needs and identify areas for improvement. By leveraging data analytics and strategic planning, Strong Enterprises helps businesses implement effective solutions that drive growth and enhance decision-making processes.

Strong Enterprises also emphasizes sustainability and environmental responsibility in its operations. The company actively seeks out eco-friendly practices and solutions, ensuring that its technologies contribute to a more sustainable future. This commitment not only aligns with global efforts to combat climate change but also resonates with clients who value environmental stewardship.

Collaboration and communication are integral to Strong Enterprises’ operational philosophy. The organization fosters a culture of teamwork, encouraging cross-functional collaboration among its employees. This not only enhances innovation but also ensures that clients receive well-rounded solutions that address all aspects of their challenges.

In conclusion, Strong Enterprises 48057 stands out as a leader in technological innovation and service excellence. With its focus on research and development, custom software solutions, consulting services, sustainability, and collaboration, Strong Enterprises is well-equipped to meet the dynamic demands of its clients and drive success in the ever-evolving business landscape.