Multiquip MVH406GH manual Inspection and Maintenance ServiceTables, Daily Service

MVH-406GH — MAINTENANCE

CAUTION

Inspection and other services should always be carried out on hard and level ground with the engine shutdown.

Inspection and Maintenance ServiceTables.

1.To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7.

TABLE 5. MVH-406GH MACHINE INSPECTION

ITEM	HOURS OF OPERATION
Loose or Missing	Every 8 hours (every day)
Screws
Damaged Parts	Every 8 hours (every day)
Function of Controlling	Every 8 hours (every day)
System Part
Hydraulic System Leak	Every 100 hours
Vibrator Oil Check	Every 100 hours
Vibrator Oil	Every 300 hours
Replacement
Hydraulic Oil Check	Every 100 hours
Hydraulic Oil	First after 200 hours, then every
Replacement	1,000 hours
V-belt (clutch) Check	Every 200 hours

CAUTION

These inspection intervals are for operation under normal conditions. Adjust your inspection intervals based on the number hours plate compactor is in use, and particular working conditions.

CAUTION

Fuel piping and connections should be replaced every 2 years.

TABLE 6. MVH-406GH ENGINE CHECK

ITEM	HOURS OF OPERATION
Spark Plug Check	Every 40 hours (every week)
Oil or Fuel Leak	Every 8 hours (every day)
Tightness of Fastening	Every 8 hours (every day)
Threads
Engine Oil Check and	Every 8 hours (every day)
	(Replenish to specified maximum
Replenishment
	level)
Engine Oil Replacement	After first 25 hours then every 50 to
	100 hours
Air Filter Cleaning	Every 100 hours

See separate engine manual for details on engine check.

Daily Service

Check for leakage of fuel or oil.

Check for loose screws including tightness. See Table 7 below (tightening torque ), for retightening:

TABLE 7.

TIGHTENING TORQUE (in. kg/cm) Diameter

Material	6mm	8mm	10mm	12mm	14mm	16mm	18mm	20mm
4T	70	150	300	500	750	1,100	1,400	2,000
6-8T	100	250	500	800	1,300	2,000	2,700	3,800
11T	150	400	800	1,200	2,000	2,900	4,200	5,600
*	100	300~	650 ~
		350	700

* (In case counter-part is of aluminum)

(Threads in use with this machine are all right handed)

Material and quality of material is marked on each bolt, and screw.

Remove soil and clean the bottom of compaction plate.

Check hand pump, piping and hose for any leakage. A loosened hydraulic hose can be a cause for leakage. Check hydraulic hose connections with wrench applied for tightness.

Check engine oil.

MVH406GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #3 (02/04/14) — PAGE 21