A
B
Fig. 10 | Fig. 11 |
8.Continue to hold spindle lock button while using the hex wrench (furnished with tool), to tighten blade retaining bolt securely, (by rotating clockwise).
9.Rotate the “quick set” depth adjusting turret (A) Fig. 12, to the “FF” position.
10.Lift safety lever (A) Fig. 13, fully retract the plunge mechanism, and reposition the safety lever as shown in Fig. 14. Slowly release pressure on plunge mechanism.
11.Reposition blade cover plate to tool, and secure in place with the four retaining screws (removed in step 1).
DO NOT OPERATE TOOL WITHOUT BLADE COVER INSTALLED.
A
Fig. 12
A
A
Fig. 13 | Fig. 14 |
13