Porter-Cable 7319, 7310, 7320, 7312 Adjusting the BIT Exposure, Adjusting Guide Plate

Page 18

Trims odd angled corners less than or greater than 90°.

Trims up to vertical surfaces.

ADJUSTING THE BIT EXPOSURE

DISCONNECT THE TOOL FROM THE POWER SOURCE.

1.Loosen the base locking screw (E) Fig. 20 approximately 1/4 turn.

2.Turn the depth-adjusting wheel (D) Fig. 20 counter-clockwise (looking at top of wheel) to lower the bit until it touches the guide plate.

3.Firmly tighten the locking screw (E).

E

D

Fig. 20

ADJUSTING GUIDE PLATE

The Underscribe Trimmer Base is equipped with an adjustable guide plate (Fig. 21). Adjust the guide plate by rotating the eccentric, using the special wrench that is supplied with the Trimmer Base. To adjust the guide:

1.Make a trial cut using scrap material and check the fit.

DISCONNECT THE TOOL FROM THE POWER SOURCE.

2.Turn the eccentric to correct fit.

NOTE: If the joint is too loose (with a crack between the two pieces of laminate), turn the eccentric clockwise.

If joint to too tight so that the laminate will not snap into place, turn the eccentric counter-clockwise.

3.Repeat Steps 1 through 3 as required to achieve a good fit.

Fig. 21

USING THE UNDERSCRIBE TRIMMER

The bottom plate of the Underscribe Trimmer has a guide lip (Fig. 22). This guide lip is moved along an installed piece of laminate as the trimmer bit cuts the mating piece of laminate.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Double Insulated Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the Trimmer BIT Area before starting motorSymbol Definition MotorForeword Functional DescriptionExtension Cord Selection Selecting the BITCarton Contents Assembly OperationTo Install the BIT Model 7310 Trimmer AssemblyTo Remove the BIT Adjusting the Depth of CUT Adjusting the SUB-BASE AlignmentOptional 73100 Edge Guide KIT Flush Trimming Bevel TrimmingModel 7319 Tilt Base Trimmer Assembly Using Straight Edge GuideAdjusting the Tilt Model 7312 Offset Trimmer Assembly To Install & Remove the BIT Through the spindle lock holeUnderscribe 7320 Trimmer Assembly Typical Applications Trimming 3/4 IN-AND-OUT Trimming ScribingAdjusting the BIT Exposure Adjusting Guide PlateUsing the Underscribe Trimmer Is against the edge of the stile Failure to Start Troubleshooting MaintenanceKeep Tool Clean LubricationReplacement Parts ServiceAccessories Service and RepairsWarranty PORTER-CABLE Limited ONE Year WarrantyHighway 45 North Jackson, TN
Related manuals
Manual 25 pages 8.14 Kb

7312, 7319, 7320, 7310 specifications

The Porter-Cable 7310 is a highly versatile and reliable product in the realm of power tools, particularly known for its efficient and reliable design. As a rotary sander, it stands out in both professional and DIY circles, offering a blend of power, convenience, and user-friendly features which make it a staple in woodworking, furniture refinishing, and other sanding applications.

One of the main features of the Porter-Cable 7310 is its powerful motor, which delivers a significant amount of orbital action—up to 22,000 OPM (orbits per minute). This capability ensures that users can achieve a smooth finish in a variety of materials, from wood to plastics, without the risk of damaging the surface. The motor’s power combined with the random orbit design minimizes swirl marks while enhancing the overall finish quality, making it ideal for detailed work.

The design of the Porter-Cable 7310 is another highlight. It incorporates an ergonomic grip that reduces user fatigue during extended periods of use. The lightweight yet sturdy construction allows for easy maneuverability, enabling users to sand both flat and contoured surfaces with ease. Additionally, the integrated dust bag is a feature that aligns with modern workshop practices, helping to keep the work area clean and minimizing health risks associated with airborne dust particles.

Another technological innovation in the Porter-Cable 7310 is its hook-and-loop sanding pad attachment system. This design simplifies the process of changing sanding discs, saving valuable time during projects. The orbital sander is compatible with a wide range of sanding discs, including options with varying grits, making it adaptable to different tasks, from heavy stock removal to ultra-fine finishing.

Moreover, the Porter-Cable 7310 is built with durability in mind. Its robust construction is meant to withstand the rigors of daily use in both commercial and home environments. Users have praised its ability to operate quietly, contributing to a more pleasant working atmosphere.

In conclusion, the Porter-Cable 7310 is a powerful and efficient rotary sander, combining exceptional performance features with ease of use. Its lightweight design, effective dust collection system, and user-friendly sanding disc attachment make it a preferred choice for both professionals and hobbyists alike. Whether tackling large projects or intricate detailing, the Porter-Cable 7310 delivers consistent results, proving itself as an indispensable tool for sanding tasks.
Top Page Image Contents