Porter-Cable 7310 Troubleshooting Maintenance, Keep Tool Clean, Failure to Start, Lubrication

Page 20

6.Verify that the bit is clear of foreign objects and that the cord will not get caught on any obstructions.

7.Grasp the motor firmly to resist starting torque and move the switch button to the "ON" position.

8.Allow the motor to reach full-speed. Feed the trimmer from right to left with a smooth steady motion.

NOTE: The tapered edge of the underscribe base will slide underneath the rail covering, lifting the laminate into the cutter.

9.After completing the cut, move the switch button to the "OFF" position and allow the motor to come to a complete stop before putting the trimmer down.

10.Press the rail end into position and roll down.

11.Repeat this process as necessary to complete the face frame.

TROUBLESHOOTING

For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers, or call the Porter-Cable Customer Care Center at 1-800- 223-7278.

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION

This tool has been lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. No further lubrication is necessary.

BRUSH INSPECTION (If applicable)

For your continued safety and electrical protection, brush inspection and replacement on this tool should ONLY be performed by an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE•DELTA FACTORY SERVICE CENTER.

At approximately 100 hours of use, take or send your tool to your nearest authorized Porter-Cable Service Station to be thoroughly cleaned and inspected. Have worn parts replaced and lubricated with fresh lubricant. Have new brushes installed, and test the tool for performance.

Any loss of power before the above maintenance check may indicate the need for immediate servicing of your tool. DO NOT CONTINUE TO OPERATE TOOL UNDER THIS CONDITION. If proper operating voltage is present, return your tool to the service station for immediate service.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Double Insulated Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the Trimmer BIT Area before starting motorSymbol Definition MotorFunctional Description Extension Cord SelectionForeword Selecting the BITCarton Contents Assembly OperationTo Remove the BIT To Install the BITModel 7310 Trimmer Assembly Optional 73100 Edge Guide KIT Adjusting the Depth of CUTAdjusting the SUB-BASE Alignment Flush Trimming Bevel TrimmingAdjusting the Tilt Model 7319 Tilt Base Trimmer AssemblyUsing Straight Edge Guide Model 7312 Offset Trimmer Assembly To Install & Remove the BIT Through the spindle lock holeUnderscribe 7320 Trimmer Assembly Typical Applications Trimming 3/4 IN-AND-OUT Trimming ScribingUsing the Underscribe Trimmer Adjusting the BIT ExposureAdjusting Guide Plate Is against the edge of the stile Troubleshooting Maintenance Keep Tool CleanFailure to Start LubricationService AccessoriesReplacement Parts Service and RepairsWarranty PORTER-CABLE Limited ONE Year WarrantyHighway 45 North Jackson, TN
Related manuals
Manual 25 pages 8.14 Kb

7312, 7319, 7320, 7310 specifications

The Porter-Cable 7310 is a highly versatile and reliable product in the realm of power tools, particularly known for its efficient and reliable design. As a rotary sander, it stands out in both professional and DIY circles, offering a blend of power, convenience, and user-friendly features which make it a staple in woodworking, furniture refinishing, and other sanding applications.

One of the main features of the Porter-Cable 7310 is its powerful motor, which delivers a significant amount of orbital action—up to 22,000 OPM (orbits per minute). This capability ensures that users can achieve a smooth finish in a variety of materials, from wood to plastics, without the risk of damaging the surface. The motor’s power combined with the random orbit design minimizes swirl marks while enhancing the overall finish quality, making it ideal for detailed work.

The design of the Porter-Cable 7310 is another highlight. It incorporates an ergonomic grip that reduces user fatigue during extended periods of use. The lightweight yet sturdy construction allows for easy maneuverability, enabling users to sand both flat and contoured surfaces with ease. Additionally, the integrated dust bag is a feature that aligns with modern workshop practices, helping to keep the work area clean and minimizing health risks associated with airborne dust particles.

Another technological innovation in the Porter-Cable 7310 is its hook-and-loop sanding pad attachment system. This design simplifies the process of changing sanding discs, saving valuable time during projects. The orbital sander is compatible with a wide range of sanding discs, including options with varying grits, making it adaptable to different tasks, from heavy stock removal to ultra-fine finishing.

Moreover, the Porter-Cable 7310 is built with durability in mind. Its robust construction is meant to withstand the rigors of daily use in both commercial and home environments. Users have praised its ability to operate quietly, contributing to a more pleasant working atmosphere.

In conclusion, the Porter-Cable 7310 is a powerful and efficient rotary sander, combining exceptional performance features with ease of use. Its lightweight design, effective dust collection system, and user-friendly sanding disc attachment make it a preferred choice for both professionals and hobbyists alike. Whether tackling large projects or intricate detailing, the Porter-Cable 7310 delivers consistent results, proving itself as an indispensable tool for sanding tasks.
Top Page Image Contents