Porter-Cable 7310, 7320, 7319, 7312 instruction manual Flush Trimming, Bevel Trimming

Page 12

ATTACHING AND ADJUSTING THE BASE AND THE ROLLER GUIDE

1.Remove the power unit from the base unit (see “TO INSTALL BIT”).

2.Install the bit.

3.The base and roller guide (A) Fig. 5 is assembled at the factory. To install, remove a sub-base mounting screw (A) Fig. 6 and insert the alignment pin (in the guide base) into the hole (C) in the bottom of the trimmer sub-base. Fasten with two mounting screws (F) Fig. 5 and (C) Fig. 7. Hand tighten for further adjustment.

4.Install the bit (See “TO INSTALL THE BIT.”). Then, install the motor to base and adjust the depth of cut (See “ADJUSTING DEPTH OF CUT”).

5.Align the roller guide with the bit by loosening the locking screw (A) Fig. 7 and turning the adjusting screw (B) with the provided hex wrench until the guide is in the desired location.

A

C

B A

C

Fig. 6

Fig. 7

FLUSH TRIMMING

1.Attach the base and guide to the trimmer as outlined in "ATTACHING AND ADJUSTING THE BASE AND ROLLER".

2.Remove the roller guide and replace it with the flush trimming guide (B) Fig. 4. Identify this guide by the molded letter “F”. Make sure that the stud on the end of this guide faces the trimmer base.

3.Install the guide setting gauge (E) Fig. 4 in the trimmer collet (see "TO INSTALL THE BIT"). Install the trimmer motor to the base. Adjust the guide so that hole in the end of the gauge is positioned over the guide stud.

4.Remove the guide setting gauge from the trimmer and install a flush trimming bit.

5.Adjust the depth of cut so that the straight portion of the bit extends below the trimmer base at least the thickness of the workpiece.

6.Make a trial cut on scrap material.

BEVEL TRIMMING

1.Follow Steps 1 through 5 under "FLUSH TRIMMING", except install the bevel trimming guide (C) Fig. 4. This guide is identified by the molded letter “B”.

2.Adjust the depth of cut so that only the bevel portion of the bit extends below the trimmer base at least the thickness of the material to be trimmed.

3.Make a trial cut on scrap material to check alignment.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Double Insulated Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules General Safety Rules Additional Specific Safety Rules Clear the Trimmer BIT Area before starting motorSymbol Definition MotorFunctional Description Extension Cord SelectionForeword Selecting the BITCarton Contents Assembly OperationTo Install the BIT Model 7310 Trimmer AssemblyTo Remove the BIT Adjusting the Depth of CUT Adjusting the SUB-BASE AlignmentOptional 73100 Edge Guide KIT Flush Trimming Bevel TrimmingModel 7319 Tilt Base Trimmer Assembly Using Straight Edge GuideAdjusting the Tilt Model 7312 Offset Trimmer Assembly To Install & Remove the BIT Through the spindle lock holeUnderscribe 7320 Trimmer Assembly Typical Applications Trimming 3/4 IN-AND-OUT Trimming ScribingAdjusting the BIT Exposure Adjusting Guide PlateUsing the Underscribe Trimmer Is against the edge of the stile Troubleshooting Maintenance Keep Tool CleanFailure to Start LubricationService AccessoriesReplacement Parts Service and RepairsWarranty PORTER-CABLE Limited ONE Year WarrantyHighway 45 North Jackson, TN
Related manuals
Manual 25 pages 8.14 Kb

7312, 7319, 7320, 7310 specifications

The Porter-Cable 7310 is a highly versatile and reliable product in the realm of power tools, particularly known for its efficient and reliable design. As a rotary sander, it stands out in both professional and DIY circles, offering a blend of power, convenience, and user-friendly features which make it a staple in woodworking, furniture refinishing, and other sanding applications.

One of the main features of the Porter-Cable 7310 is its powerful motor, which delivers a significant amount of orbital action—up to 22,000 OPM (orbits per minute). This capability ensures that users can achieve a smooth finish in a variety of materials, from wood to plastics, without the risk of damaging the surface. The motor’s power combined with the random orbit design minimizes swirl marks while enhancing the overall finish quality, making it ideal for detailed work.

The design of the Porter-Cable 7310 is another highlight. It incorporates an ergonomic grip that reduces user fatigue during extended periods of use. The lightweight yet sturdy construction allows for easy maneuverability, enabling users to sand both flat and contoured surfaces with ease. Additionally, the integrated dust bag is a feature that aligns with modern workshop practices, helping to keep the work area clean and minimizing health risks associated with airborne dust particles.

Another technological innovation in the Porter-Cable 7310 is its hook-and-loop sanding pad attachment system. This design simplifies the process of changing sanding discs, saving valuable time during projects. The orbital sander is compatible with a wide range of sanding discs, including options with varying grits, making it adaptable to different tasks, from heavy stock removal to ultra-fine finishing.

Moreover, the Porter-Cable 7310 is built with durability in mind. Its robust construction is meant to withstand the rigors of daily use in both commercial and home environments. Users have praised its ability to operate quietly, contributing to a more pleasant working atmosphere.

In conclusion, the Porter-Cable 7310 is a powerful and efficient rotary sander, combining exceptional performance features with ease of use. Its lightweight design, effective dust collection system, and user-friendly sanding disc attachment make it a preferred choice for both professionals and hobbyists alike. Whether tackling large projects or intricate detailing, the Porter-Cable 7310 delivers consistent results, proving itself as an indispensable tool for sanding tasks.
Top Page Image Contents