Ryobi A25RT02 manual General Safety Rules, Read ALL Instructions

Page 3

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

READ ALL INSTRUCTIONS

KNOW YOUR POWER TOOL. Carefully read the router table operator’s manual and the manual for the particular router you are using. Learn the applications and limita- tions as well as the specific potential hazards related to this tool.

GUARD AGAINST ELECTRICAL SHOCK BY PREVENT- ING BODY CONTACT WITH GROUNDED SURFACES. For example: pipes, radiators, ranges, refrigerator enclo- sures.

KEEP GUARDS IN PLACE and in good working order.

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

KEEPWORKAREACLEAN. Cluttered areas and benches invite accidents. DO NOT leave tools or pieces of wood on the tool while it is in operation.

DO NOT USE IN DANGEROUS ENVIRONMENTS. Do not use power tools in damp or wet locations or expose to rain. Keep the work area well lit.

KEEP CHILDREN AND VISITORS AWAY. All visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extension cord while operating.

MAKE WORKSHOP CHILDPROOF with padlocks, master switches, or by removing starter keys.

DON’T FORCE THE TOOL. It will do the job better and safer at the feed rate for which it was designed.

USE THE RIGHT TOOL. Do not force the tool or attach- ment to do a job for which it was not designed.

USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. Use only a cord heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage result- ing in loss of power and overheating. A wire gauge size (A.W.G.) of at least 14 is recommended for an extension cord 25 feet or less in length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

DRESS PROPERLY. Do not wear loose clothing, neckties, or jewelry that can get caught and draw you into moving parts. Rubber gloves and nonskid footwear are recommended when working outdoors. Also wear pro- tective hair covering to contain long hair.

ALWAYS WEAR SAFETY GLASSES WITH SIDE SHIELDS. Everyday eyeglasses have only impact- resistant lenses, they are NOT safety glasses.

SECURE WORK. Use clamps or a vise to hold work when practical, it is safer than using your hand and frees both hands to operate the tool.

DO NOT OVERREACH. Keep proper footing and balance at all times.

MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories.

DISCONNECT TOOLS. When not in use, before servicing, or when changing attachments, blades, bits, cutters, etc., all tools should be disconnected from power source.

AVOID ACCIDENTAL STARTING. Be sure switch is off when plugging in any tool.

USE RECOMMENDED ACCESSORIES. Consult the operator’s manual for recommended accessories. The use of improper accessories may result in injury.

NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped.

CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.

NEVER LEAVE TOOL RUNNING UNATTENDED. TURN THE POWER OFF. DO NOT LEAVE TOOL UNTIL IT COMES TO A COMPLETE STOP.

USE THE RIGHT DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of blade or cutter only.

PROTECT YOUR LUNGS. Wear a face or dust mask if the operation is dusty.

PROTECT YOUR HEARING. Wear hearing protection during extended periods of operation.

DO NOT ABUSE CORD. Never carry tool by the cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

USE OUTDOOR EXTENSION CORDS. When tool is used outdoors, use only extension cords marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor could ignite fumes.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction WarrantyRead ALL Instructions General Safety Rules Always Feed Workpiece Against Rotation of Cutter Specific Safety Rules Always USE the Articulating Router Cutter BIT Guard  do not USE Awkward Hand PositionsName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceElectrical Connection Speed and WiringElectrical Extension CordsFeatures Throat Plates Reset ButtonSwitch Assembly Starting PINAssembly UnpackingPacking List Attaching the Table Legs Attaching the Switch BOXAssembling the Router Table Attaching the Under Table GuardsAttaching the Router to the Insert Plate PRE-DRILLING Holes for Through Table Depth AdjustmentInstalling the ROUTER/INSERT Plate Assembly Attaching the Router to the TableKM12VC Inserting and Removing Throat Plates Attaching the Fence AssemblyHEX KEY Insert Plateadjusting Straight Screws Edge Making Insert Plate LevelInstalling the Miter Gauge Attaching the FeatherboardInserting the Starting PIN Attaching the Vacuum Hose Clamping the Router Table to a Work BenchMounting the Router Table to a Work Bench Operation ApplicationsPerforming a Routing Operation Positioning the Fence Adjusting Depth of CUTAdjusting the Miter Gauge INSERTING/REMOVING CuttersGeneral Maintenance MaintenanceParts and Service

A25RT02 specifications

The Ryobi A25RT02 is a versatile and robust tool designed for both home improvement enthusiasts and professional contractors. This innovative product features a powerful motor that enhances its performance across a range of applications, making it an essential addition to any toolbox.

One of the standout features of the A25RT02 is its lightweight and ergonomic design. Weighing in at just a few pounds, this tool is easy to handle and reduces user fatigue during prolonged use. The rubber overmolded grip provides comfort and stability, allowing for precise control whether you're working on delicate projects or heavy-duty tasks.

The A25RT02 is equipped with advanced technology that enables quick adjustments and versatility. Its adjustable cutting depth and width make it suitable for various materials, ensuring that users can achieve the desired finish with ease. The tool also features a variable speed control that allows for customization based on the application, providing better results whether you're cutting, sanding, or shaping.

Another remarkable characteristic of the A25RT02 is its compatibility with Ryobi's extensive line of ONE+ batteries, which offers greater convenience and portability. This means users can easily switch between different Ryobi tools without the hassle of changing batteries or being tethered to a power outlet. The battery life is impressive, allowing users to complete tasks without frequent interruptions for recharging.

Safety is a key consideration in the design of the A25RT02. It comes with built-in safety features such as a blade guard and a safety switch to prevent accidental activation. These features contribute to a safer working environment, particularly when working on complex or intricate projects.

Durability is another hallmark of the Ryobi A25RT02. Constructed with high-grade materials, this tool is built to withstand the rigors of daily use, ensuring longevity and reliability. The easy-to-replace parts further extend its usability, making repairs straightforward without the need for specialized tools.

In summary, the Ryobi A25RT02 is a cutting-edge tool that combines power, versatility, and safety in a user-friendly package. Its lightweight design, compatibility with the Ryobi ONE+ battery system, advanced speed settings, and robust safety features make it an ideal choice for anyone looking to enhance their craftsmanship. Whether you're a hobbyist or a professional, the A25RT02 is sure to meet your creative and practical needs.
Top Page Image Contents