Ryobi RT101 manual Introduction, Table of Contents

Page 2

 

 

TABLE OF CONTENTS

Q

Introduction

2

Q Rules for Safe Operation

3-4

Q

Symbols

5

Q

Specifications

6

Q

Unpacking

6

Q

Features

7

Q

Assembly

9-12

Q

Adjustments

13-15

Q

Operation

15-16

Q

Maintenance

16

Q Parts, Ordering, and Service

18

 

 

INTRODUCTION

Your router table has many features for making the use of a router more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this router table making it easy to maintain and operate.

WARNING:

Do not attempt to use this product until you have read thoroughly and understand completely the operator’s manual. Pay close attention to the safety rules, including Dangers, Warnings, and Cautions. If you use your router table properly and only for what it is intended, you will enjoy years of safe, reliable service.

WEAR YOUR

SAFETY GLASSES

FORESIGHT IS BETTER

THAN NO SIGHT

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.

Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.

2

Image 2
Contents Operators Manual Save this Manual for Future ReferenceTable of Contents IntroductionRules for Safe Operation Read ALL InstructionsRules for Safe Operation Symbols Symbol Name DESIGNATION/EXPLANATIONInformation SpecificationsUnpacking Packing ListFeatures Front View Rear View Assembly Assembling the Router TableTo Attach the Fence Attaching the Rear Safety Guard To the Router Attaching the Router to the TableMounting the Table to a Work Surface See a and 10bINSERTING/REMOVING Cutters AdjustmentsAdjusting Depth of CUT Positioning the Fence Adjusting the Step RisersInserting Throat Plates Operation Adjusting the Miter GaugeUsing the Router with the Router Table Inserting the Starting PINGeneral MaintenancePerforming a Routing Operation Page Service Model NO. and Serial no