Ryobi R181D, R181FB, R181PF, RE1802M manual Table of Contents, Introduction

Page 2

 

 

TABLE OF CONTENTS

■

Introduction

2

■

General Safety Rules

3-4

■

Specific Safety Rules

4

■

Symbols

5

■

Electrical

6

■

Features

7-8

■

Unpacking

8

■

Operation

9-21

■

Maintenance

22

■ Parts, Ordering, and Service

24

INTRODUCTION

This router has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this tool making it easy to maintain and operate.

WARNING:

Do not attempt to operate this tool until you read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual and on the product. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save operator's manual and review frequently for continuing safe operation, and instructing others who may use this tool.

Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.

WARNING:

The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Operators Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Work AreaSpecific Safety Rules ServiceSymbols Symbol Name DESIGNATION/EXPLANATIONElectrical Connection ElectricalDouble Insulation Extension CordsFeatures Locking ARM Depth Adjustment Ring Gold SpindleUnpacking Lock ButtonOperating the Router OperationTurning the Router ON/OFF See FigureDepth Adjustment Ring Indicator Arrow Removing and Installing the Router BaseTo Install the Plunge Base To Remove the Fixed or D-HANDLE BaseSee Figures 6 To Switch from Plunge Base to Fixed Base or D-HANDLE BaseTo Install the Fixed or D-HANDLE Base To Remove the Plunge BaseTo insert the cutter REMOVING/INSERTING CuttersTo remove the cutter Loosen Tighten Spindle Lock ButtonDepth Indicator Ring Adjustment Arrow Adjusting Depth of CUTTo Adjust Depth of CUT for Fixed Base or D- Base Routers Indicator PointSee Figures 11, 12, To Adjust Depth of CUT for Plunge Base RoutersPlunge Lock Lever Cutter Stop BAR Knob Depth Indicator Feeding the Router TOO Fast TOO Slow Rate of FeedFeeding Too Fast See Figure Feeding Too Slow See FigureRouting Grooves Determining Depth of CUTRouting Routing by Freehand Router Work Pilot Guide Edging with PilotsRouter Pilot Work Routing with the Guide Bushing To Install the Template Guide BushingRouter Template Guide Bushing KIT See Figures 23See Figures 25 To Install the Straight GuideStraight Guide Maintenance AccessoriesPage Service Model NO. and Serial no
Top Page Image Contents