Ryobi R181FB, R181PF manual Unpacking, Locking ARM, Depth Adjustment Ring Gold Spindle, Lock Button

Page 8

FEATURES

LOCKING ARM	SWITCH

DEPTH

ADJUSTMENT

RING

	GOLD SPINDLE	HANDLE
	LOCK BUTTON	HANDLE
	LOCK BUTTON

1 / 3 2

0

1	2

15/32

7/16

13

/

PLUNGE BASE

3/

32

D-HANDLE BASE

CHIP SHIELD

Fig. 1

UNPACKING

INSTRUCTIONS

When unpacking the tool:

■Carefully remove the tool and accessories from the box.

■Make sure that all items listed in the packing list are in- cluded.

■Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

■Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

■If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

PACKING LIST

Router

Fixed Base, Plunge Base, and D-Base

Collet Adaptor

Collet Wrench

Tool Bag

Template Guide Bushing Kit

Straight Guide

Operator's Manual

Warranty Registration Card

WARNING:

If any parts are missing do not operate the tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

The tool should never be connected to a power sup- ply when you are assembling parts, making adjust- ments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will pre- vent accidental starting that could cause injury.

8

Image 8

Contents Operators Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Work AreaSpecific Safety Rules ServiceSymbols Symbol Name DESIGNATION/EXPLANATIONElectrical Double InsulationElectrical Connection Extension CordsFeatures Depth Adjustment Ring Gold Spindle UnpackingLocking ARM Lock ButtonOperation Turning the Router ON/OFFOperating the Router See FigureRemoving and Installing the Router Base To Install the Plunge BaseDepth Adjustment Ring Indicator Arrow To Remove the Fixed or D-HANDLE BaseTo Switch from Plunge Base to Fixed Base or D-HANDLE Base To Install the Fixed or D-HANDLE BaseSee Figures 6 To Remove the Plunge BaseREMOVING/INSERTING Cutters To remove the cutterTo insert the cutter Loosen Tighten Spindle Lock ButtonAdjusting Depth of CUT To Adjust Depth of CUT for Fixed Base or D- Base RoutersDepth Indicator Ring Adjustment Arrow Indicator PointSee Figures 11, 12, To Adjust Depth of CUT for Plunge Base RoutersPlunge Lock Lever Cutter Stop BAR Knob Depth Indicator Feeding the Router Rate of Feed Feeding Too Fast See FigureTOO Fast TOO Slow Feeding Too Slow See FigureRouting Grooves Determining Depth of CUTRouting Routing by Freehand Router Work Pilot Guide Edging with PilotsRouter Pilot Work To Install the Template Guide Bushing Router Template Guide Bushing KITRouting with the Guide Bushing See Figures 23See Figures 25 To Install the Straight GuideStraight Guide Maintenance AccessoriesPage Service Model NO. and Serial no