Manuals / JVC / Home Audio / Stereo Receiver

JVC RX-6510VBK manual Basic Settings, Recording a Source, Changing the Source Name

Models: RX-6510VBK

1 40
Download 40 pages 63.65 Kb
Page 15
Image 15

Basic Settings

Some of the following settings are required after connecting and positioning your speakers in your listening room, while others will make operations easier.

English

Recording a Source

You can record any source playing through the receiver to a cassette deck (or a CD recorder) connected to the TAPE/CDR jacks and the VCR connected to the VCR jacks at the same time.

While recording, you can listen to the selected sound source at whatever sound level you like without affecting the sound levels of the recording.

Note:

The output volume level, bass boost (see page 11), tone adjustment (see page 11), and DSP modes (see page 19) cannot affect the recording.

Changing the Source Name

When you have connected the CD recorder to the TAPE/CDR jacks on the rear panel, change the source name shown on the display when you select the CD recorder as the source.

On the front panel ONLY:

When changing the source name from “TAPE” to “CDR”:

1. Press TAPE/CDR.

TAPE/CDR

• Make sure “TAPE” appears on the display.

SOURCE NAME

2.Press and hold SOURCE NAME (TAPE/CDR) until “ASSGN. CDR” appears on the display.

Adjusting the Front Speaker Output

Balance

If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.

Before you start, remember....

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel ONLY:

1. Press ADJUST repeatedly until

ADJUST SETTING

 

“L/R BALANCE” appears on the

 

display.

 

The display changes to show the current setting.

To change the source name from “CDR” to “TAPE,”

repeat the same procedure above (in step 1, make sure “CDR” appears on the display).

Note:

Without changing the source name, you can still use the connected components. However, there may be some inconvenience.

–“TAPE” will appear on the display when you select the CD recorder.

–You cannot use the digital input (see page 15) for the CD recorder.

–You cannot use the COMPU LINK remote control system (see page 26) to operate the CD recorder.

Setting the Subwoofer Information

Register whether you have connected a subwoofer or not.

2.Press CONTROL UP 5/DOWN ° to adjust the balance.

•Pressing CONTROL UP 5decreases the left channel output from CNTR (Center) to –21.

•Pressing CONTROL DOWN° decreases the right channel output from CNTR (Center) to –21.

CONTROL

DOWN UP

Before you start, remember....

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel ONLY:

1.

Press SETTING repeatedly until

T SETTING

 

 

 

“SUBWOOFER” appears on the

 

 

 

 

 

 

display.

 

 

 

The display changes to show the current setting.

 

 

2.

Press CONTROL UP 5/DOWN °

CONTROL

DOWN UP

to register whether you have connected a subwoofer or not.

•Each time you press the button, the subwoofer setting alternates between “YES” and “NO.”

YES: Select this when a subwoofer is used. S.WFR lights up on the display (see page 9.)

NO: Select this when no subwoofer is used.

12

Page 14 Page 16
Page 15
Image 15
JVC RX-6510VBK Basic Settings, Recording a Source, Changing the Source Name, Adjusting the Front Speaker Output Balance
Page 14 Page 16

RX-6510VBK specifications

The JVC RX-6510VBK is a dynamic and robust A/V receiver that caters to both audiophiles and casual listeners alike. This versatile piece of equipment combines advanced technology with user-friendly features, making it an excellent choice for home theater setups and music enthusiasts.

One of the standout characteristics of the RX-6510VBK is its power output. It delivers 100 watts per channel across five channels, ensuring that movies and music come alive with impressive clarity and depth. The receiver supports a range of speaker configurations, allowing users to optimize their sound experience based on their available space and preferences. The flexibility of setup means that whether you are using a simple stereo speaker system or a full surround sound setup, the RX-6510VBK can accommodate and enhance the experience.

In terms of connectivity, the RX-6510VBK is equipped with multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices effortlessly. The support for 4K video pass-through ensures that users can enjoy their media in stunning high definition, future-proofing their home entertainment systems. Additionally, the receiver includes optical and coaxial digital audio inputs, ensuring compatibility with a wide range of devices.

A notable technology incorporated within the RX-6510VBK is JVC’s digital sound processing, which enhances audio playback and ensures a clear, immersive sound experience. The built-in equalizer provides various settings to tailor the audio output based on listener preferences or room characteristics. This personalization allows for a sound profile that ideally suits the environment and enhances listener enjoyment.

Further enhancing its usability is the intuitive remote control that simplifies operation from across the room. The on-screen display provides quick access to settings and adjustments, making navigation straightforward and user-friendly.

With its range of features, solid power output, and impressive connectivity options, the JVC RX-6510VBK stands out as a reliable and high-quality choice for anyone looking to elevate their audio-visual experience. Whether it’s for movie nights or music enjoyment, this receiver delivers performance and flexibility that meets the demands of modern home entertainment systems.