V I . C O M F O R T A D J U S T M E N T S

TILLER ANGLE ADJUSTMENT

WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the scooter is in motion.

Your scooter is equipped with an adjustable pivot- ing tiller.

1.Squeeze the tiller adjustment lever. See figure 14.

2.Move the tiller to a comfortable position.

3.Release the tiller adjustment lever.

NOTE: In order to fully lower the tiller for pur- poses of disassembly or transport, you must first completely remove the seat. See VII. “Disassem- bly and Assembly.”

MIRROR POSITION

To install the mirror (see figure 15):

1.Determine on which side to install the mirror and remove the rubber plug from the top of the tiller handle.

2.Insert the threaded end of the mirror holder into the opening and rotate it clockwise until snug.

3.If necessary, rotate the nut clockwise to secure the mirror in place.

To adjust the mirror:

1.Position yourself in a seated driving position fac- ing forward.

2.Adjust the mirror left, right, up, or down until you have a good line of sight behind you.

SEATBACK ADJUSTMENT

WARNING! Do not operate your scooter with the seatback in a reclined position.

WARNING! Always keep your back pressed firmly against the seatback while adjusting the angle.

To adjust your scooter's reclining seat, perform these steps. See figure 16.

1.With your back pressed up against the seatback, lift up on the seatback adjustment lever and lean forward or rearward to adjust the seatback angle.

2.Release the seatback adjustment lever once the seat is in a comfortable riding position.

TILLER ADJUSTMENT LEVER

Figure 14. Tiller Adjustment

MIRROR HOLDER

RUBBER PLUG

NUT

Figure 15. Mirror Installation and Positioning

SEATBACK

ADJUSTMENT

LEVER

Figure 16. Seatback Adjustment

Pursuit

www.pridemobility.com

31

Page 31
Image 31
Pride Mobility INFMANU3890 manual C O M F O R T a D J U S T M E N T S, Tiller Angle Adjustment, Mirror Position