A P P E N D I X I - S P E C I F I C A T I O N S

Model Number

SC713

 

 

Maximum Allowable Incline

8° (14.1%)

 

 

Maximum Obstacle Climbing Ability

2 in. (5 cm)

 

 

Overall Length2

53.25 in. (135.25 cm)

Overall Width2

25.25 in. (64.13 cm)

Total Weight Without Batteries2,5

225 lbs. (102.05 kg)

Heaviest Piece When Disassembled

Front section: 95 lbs. (43.09 kg)

 

 

Turning Radius2

Left: 67.75 in. (172 cm), Right: 66.75 in. (169.5cm)

Speed (Maximum)1

8 mph (12.87 km/h)

Range Per Charge1, 4

Up to 14 miles (22.5 km) with 55 Ah batteries

 

Up to 19.67 miles (31.65 km) with 75 Ah batteries

 

 

Ground Clearance2

3.56 in. (9 cm)

Weight Capacity

400 lbs. (181 kg)

 

 

Standard Seating

Type: CRS Deluxe

 

Weight: 51 lbs. (23.13 kg)

 

Material: Black Vinyl

 

Dimensions: 18 in. (45 cm) overall width

 

18 in. (45 cm) effective depth

 

 

Drive System

Rear-wheel drive, sealed transaxle, 24-volt DC motor

 

 

Dual Braking System

Regenerative and electromechanical

 

 

Tires

Type: Solid

 

Front and rear: 13 in. (33 cm)

 

 

Battery Requirements3, 6

Two 12-volt, deep-cycle

 

Size: 55Ah, weight: 38 lbs. (17.23 kg) each

 

Size: 75 Ah, weight: 52 lbs. (23.58 kg) each

 

 

Battery Charger

5-amp, off-board: up to 55 Ah battereis

 

8-amp, off-board: up to 75 Ah batteries

 

 

1Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition and tire condition. This specification can be subject to a variance of (+ or -) 10%.

2Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or - ) 3 %.

3AGM or Gel-Cell type required. See IV. “Batteries and Charging.

4Tested in accordance with ANSI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum weight capacity.

5Inludes standard seat.

6Battery weight may vary based on manufacturer.

NOTE: This product conforms to all applicable ANSI/RESNA testing requirements and ISO 7176 series EN12184 standards. All specifications subject to change without notice.

40

www.pridemobility.com

Pursuit

Page 40
Image 40
Pride Mobility INFMANU3890 manual P E N D I X I Specification S