I I I . Y O U R S C O O T E R
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial, key switch, battery condition meter, horn buttons, turn signal buttons, tiller adjustment lever, and the throttle control lever. See figure 4.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console does become exposed to moisture, do not attempt to operate your scooter until the tiller console has dried thoroughly.
LEFT TURN SIGNAL INDICATOR
SPEED ADJUSTMENT DIAL
TILLER ADJUSTMENT LEVER
THROTTLE
CONTROL
LEVER
HORN BUTTON
LEFT TURN SIGNAL BUTTON
HAZARD LIGHTS SWITCH
STATUS LED |
BATTERY CONDITION METER |
RIGHT TURN SIGNAL INDICATOR |
KEY SWITCH |
THROTTLE
CONTROL
LEVER
HORN BUTTON
RIGHT TURN SIGNAL BUTTON
LIGHTS SWITCH
Figure 4. Tiller Console Components
Speed Adjustment Dial
This dial allows you to preselect and limit your scooter’s top speed.
The image of the tortoise represents the slowest speed setting.
The image of the hare represents the fastest speed setting.
Key Switch
Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter. Turn the key counterclockwise to power down (turn off) your scooter.
WARNING! If the key is turned to the “off” position while your scooter is in motion, the electronic brakes will engage and your scooter will come to an abrupt stop!
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approximate battery voltage strength. For further information on battery charging, see IV. “Batteries and Charging.”
Pursuit | www.pridemobility.com | 19 |
