JVC RX-6510VBK manual CD changer, 7/P, Cassette deck, Rew, CD recorder

CD changer

After pressing CONTROL repeatedly until “CDDSC” appears on the display window, you can perform the following operations on the CD changer:

PLAY3:	Starts playing.
4:	Returns to the beginning of the current (or previous)
¢:	track.
	Skips to the beginning of the next track.
STOP7:	Stops playing.
PAUSE8:	Pauses playing. To release it, press PLAY3.
1 – 6, 7/P:	Selects the number of a disc installed in a CD
	changer.

After pressing CD, you can perform the following operations on the CD changer:

1 – 10, +10: Selects a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

EXAMPLE:

•Selecting disc number 4, track number 12, and starting playback.

1.Press CONTROL repeatedly until “CDDSC” appears on the display window, then press 4.

2.Press CD, then press +10, 2.

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301)

you can do the following operations using the number buttons after pressing CD.

1.Select a disc number.

2.Then select a track number (always enter two digits).

3.Start playback.

EXAMPLES:

•Selecting disc number 3, track number 2, and starting playback. Press 3, then, 0, 2, then PLAY3.

•Selecting disc number 10, track number 5, and starting playback. Press 1, 0, then, 0, 5, then PLAY3.

•Selecting disc number 105, track number 12, and starting playback.

Press 1, 0, 5, then 1, 2 then PLAY3.

Cassette deck

After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE” appears on the display window), you can perform the following operations on a cassette deck:

PLAY3:	Starts playing.
REW:	Fast winds the tape from right to left.
FF:	Fast winds the tape from left to right.
STOP7:	Stops operations.
PAUSE8:	Pauses playing. To release it, press PLAY3.

REC PAUSE: Starts recording or enters recording pause.

CD recorder

After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE” appears on the display window), you can perform the following operations on the CD recorder:

PLAY3:	Starts playing.
4:	Returns to the beginning of the current (or previous)
¢:	track.
	Skips to the beginning of the next track.
STOP7:	Stops playing.
PAUSE8:	Pauses playing. To release it, press PLAY3.

REC PAUSE: Starts recording or enters recording pause.

Note:

You can use either TAPE/CDR button or CONTROL button to activate the buttons listed above. If you press TAPE/CDR, the playing source also changes. On the other hand, if you press CONTROL repeatedly to select “TAPE,” the playing source does not change.

English

28