JVC RX-6510VBK manual Reproducing the Sound Field, DAP modes, English

DAP modes

In order to reproduce a more acoustic sound field in your listening room while playing soundtracks of stereo sources, you can use DAP modes. This mode can be used when the front speakers and the rear speakers are connected to this receiver (without respect to the center speaker connection).

You can select one of the following to your preference.

LIVE CLUB: Gives the feeling of a live music club with a low ceiling.

DANCE CLUB: Gives a throbbing bass beat.

HALL: Gives clear vocal and the feeling of a concert hall.

PAVILION: Gives the spacious feeling of a pavilion with a high ceiling.

Reproducing the Sound Field

The sound heard in a concert hall or club consists of direct sound and indirect sound — early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls. These direct sounds and indirect sounds are the most important elements of the acoustic surround effects.

JVC Theater Surround and DAP modes can create these important elements, and give you a real “being there” feeling.

	Reflections from
Early reflections	behind
Direct sounds

English

Available DSP modes according to the input mode						◯: Possible ×: Impossible
	BUTTON	SURROUND ON/OFF			DSP MODE
	MODE	SURROUND ON	THEATER	LIVE CLUB	DANCE CLUB	HALL	PAVILION	DSP OFF
								(SURROUND OFF)
	ANALOG	◯	◯	◯	◯	◯	◯	◯
	(2 CH)	(DOLBY PRO LOGIC)
	LINEAR PCM	◯	◯	◯	◯	◯	◯	◯
		(DOLBY PRO LOGIC)
INPUT
	DOLBY DIGITAL	◯ *1	×	×	×	×	×	◯
		(DOLBY DIGITAL)
	DTS	◯ *2	×	×	×	×	×	◯
		(DTS SURROUND)

*1 When 2 channel signal comes in, DOLBY PRO LOGIC is selected. When other signals come in, DOLBY DIGITAL is selected. *2 When 2 channel signal comes in, DOLBY PRO LOGIC is selected. When other signals come in, DTS SURROUND is selected.

20