JVC RX-6510VBK Connecting Audio/Video Components, About the speaker impedance, Audio Components

English

About the speaker impedance			Connecting the subwoofer speaker
The required speaker impedance of the front speakers does differ			You can enhance the bass by connecting a subwoofer.
depending on whether both the FRONT SPEAKERS 1 and FRONT			Connect the input jack of a powered subwoofer to the
SPEAKERS 2 terminals are used or only one of them is used.			SUBWOOFER OUT jack on the rear panel, using a cable with RCA
			pin plugs (not supplied).
	CASE 1	When you connect only one pair of front speakers

Front	Front
speaker	speaker
1	1

SUBWOOFER

Powered subwoofer

OUT

Use front speakers with 8 Ω – 16Ω impedance.

CASE 2 When you connect two pairs of front speakers

Front	Front
speaker	speaker
2	2
Front	Front
speaker	speaker
1	1

Use front speakers 16 Ω – 32Ω impedance.

Connecting the rear and center speakers

Connect rear speakers to the REAR SPEAKERS terminals and a center speaker to the CENTER SPEAKER terminals.

Center

speaker

CENTER	REAR
	SPEAKERS
SPEAKER

+

Left rear	Right rear
speaker	speaker

–

RIGHT LEFT

Connecting Audio/Video Components

You can connect the following audio/video components to this receiver. Refer also to the manuals supplied with your components.

Audio Components	Video Components
• CD player*	• DVD player*
• Cassette deck	• TV*
or CD recorder*	• VCR

*You can connect these components using the methods described in “Analog connections” (below) or in “Digital connections” (see page 7).

Analog connections

Audio component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, and the red plug to the audio right jack.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

CD player

CD player

CD

OUT

(REC)

To audio output	TAPE
	CDR

IN

(PLAY)

OUT

(REC)

VCR

5