P 6/ 6
Wiring diagram
Fig. D-2
Pay attention to the directions of lead wires and connect Flag receptacles to electrical parts.
Refer to the following illustration.
Terminal | DC motor |
Fig. D-3
Before installing Switch in Housing R, route Lead wires as illustrated below and connect two Connectors. Do not put their Lead wires on the ribs of Housing L.
Lead wire holders
Housing L
Connector
(To Switch)
Connector
Lead wires have to fixed with the ribs.
|
|
|
|
| LED | |
|
|
|
|
| ||
|
|
|
|
| ||
Lead wires in this area | ||||||
| ||||||
|
| |||||
must be tight. |
|
| ||||
Fig. D-4
Bend the terminals of DC motor | Route Lead wires between ribs. | Insert Connectors between |
as illustrated. |
| their Lead wire holders. |
Flag receptacles and Lead wires have to be far from DC motor.
Do not put them on the ribs.
Fix Lead wires with Lead wire holders.
Face the
Lead wires between Connector and Switch have to be placed behind Switch.
Do not ride Lead wires on the screw embosses.