ADDITIONAL SAFETY RULES I FOR CHARGER & BATTERY CARTRIDGE
1.Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF).
2.Do not attempt to use a
3.Do not allow anythiqg to cover or clog the charger vents.
4.Do not short the battery cartridge:
(1)Do not touch the terminals with any conductive material.
(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
(3)Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
5.Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF).
6.Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
#
ADDITIONAL SAFETY RULES
1.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.
2.Wear ear protectors.
3.Check the socket carefully for wear, cracks or damage before installation.
4.Hold the tool firmly.
5.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
6.The proper tightening torque may differ depending upon the kind or size of the bolt.
Check the torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
5
.. .
.. _..... ..
..i...... .1 . .. .
,.....I .
. .
. ... . ... .
. .. . . . ,..
.