Makita 6912D specifications Installingsocket adapter

Page 7

Installingsocket adapter

When you wish to use a smaller size socket, install the socket adapter.

To install it, insert the socket adapter into the socket in the tool, making sure that the tightening direction matches the arrow on the tool.

To loosen the nut or bolt, turn the tool over (upside-down) and insert the socket adapter into the socket in the tool.

Switch action

To start the tool, simply depress the switch lever. Release the switch lever to stop.

Socket adapter

I

I

Switch lever

 

CAUTION:

Before inserting the battery cartridge into the tool, always check to see that the switch Jever actuates properly and returns to the "OFF" position when released.

Operation

1.Motor-driven semi-tighteningoperation Make sure that the tightening direction

matches the arrow on the tool. Hold the tool bv the orir,- .area and dace the socket over the nut or bolt. Turn the tool on and continue to tighten until the torque limiter actuates, then turn the tool off

3

'

CAUTION :

When operating the tool, be sure to place the socket over the nut or bolt securely.

Image 7
Contents Cordless Ratchet Wrench Safety Instructions Page Important Safety Instructions Additional Safety Rules For Charger & Battery Cartridge Set plate Battery cartridge Installingsocket adapter Bolt Size Maintenance ACCESS0 R IES Model Makita Corporation