Intended Use, General safety rules | Black & Decker HG2000 guide

Intended Use

Your Black & Decker heat gun has been designed for various heating applications (eg. Paint stripping)

General safety rules

Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. SAVE THESE INSTRUCTIONS.

1. Work area

a.Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

3. Personal safety

a.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b.Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c.Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

ENGLISH

d.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power toolin unexpected situations.

f.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards.

4. Power tool use and care

a.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f.Use the tool, in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Service

a.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional Safety Instructions for Heat Guns

•Always switch off before putting tool down.

•Extreme care should be taken when stripping paint, the peelings, residue and vapors of paint may contain lead, which is poisonous. Once deposited on surfaces, hand to mouth contact can result in the ingestion of lead.

Exposures to even low levels of lead can caused irreversible brain and nervous system damage; young and unborn children are particularly vulnerable. Do not smoke, eat or drink in a

HG2000 specifications

The Black & Decker HG2000 is a versatile and powerful heat gun designed for a variety of applications, making it an essential tool for both professionals and DIY enthusiasts. This device stands out due to its robust performance, user-friendly features, and innovative technologies.

One of the standout features of the HG2000 is its two temperature settings, which allow users to choose between 750°F and 1000°F. This flexibility makes it suitable for a wide range of tasks, from removing paint and varnish to bending plastic and loosening rusted bolts. The ability to switch between heat settings ensures that users can adapt the tool to their specific needs, enhancing its utility.

The HG2000 is also equipped with an ergonomic design that enhances comfort during extended use. Its lightweight construction makes it easy to handle, while the built-in support stand allows for hands-free operation. This feature is particularly useful when users need to focus on other tasks while the heat gun works on a specific area.

Safety is a crucial consideration in any tool design, and Black & Decker has incorporated several safety features in the HG2000. The heat gun comes with a protective nozzle that helps prevent accidental burns and overheating. Additionally, the integrated overload protection ensures that the gun operates within safe limits, reducing the risk of damage to the tool and extending its lifespan.

Another noteworthy characteristic of the HG2000 is its versatility. This heat gun can be used not only for DIY projects but also in professional settings such as automotive repair, woodworking, and electrical work. The various attachments available for the HG2000 further enhance its adaptability, allowing users to tackle diverse projects with ease.

In terms of technology, the HG2000 features a powerful motor that delivers consistent heat output, ensuring efficiency and effectiveness in various applications. The design also includes a cooling mechanism that helps prevent overheating, providing a longer operational life.

Overall, the Black & Decker HG2000 heat gun is a reliable and innovative tool that meets a wide range of heating needs. Its dual temperature settings, ergonomic design, safety features, and versatility make it a top choice for both seasoned professionals and hobbyists looking to enhance their toolkit. Whether you're stripping paint or soldering, the HG2000 offers the performance and reliability needed to get the job done efficiently.