Using this unit
Preparation
≥Turn on the TV.
≥If VIERA Link is activated on both the connected TV and this unit, make sure to change the TV’s settings for this unit. (> 14, “Linked operations with the TV (VIERA LinkTM “HDAVI ControlTM”)”)
≥If VIERA Link is not activated or if the TV is not compatible with VIERA Link, reduce the volume of the TV to its minimum.
1
2
1 Press [Í] to turn on this unit.
≥The current status (audio source, active audio effects and audio format) is displayed. The audio effects and audio format indicator will turn off after 4 sec.
2 Press [TV] or [BD/DVD] to select the audio source. (> right)
≥If you have selected [BD/DVD], make sure to select the TV’s input channel for this unit and start the playback.
≥Before turning off this unit, be sure to reduce the volume.
≥Even if this unit is turned off, the device connected to the HDMI AV IN terminal will continue to output audio or video to the TV.
12
ABC
Audio source indicator
AThe selected audio source is indicated
Green:
When the TV is the audio source
Red:
When the device connected to the HDMI AV IN terminal is the audio source
To adjust the volume/ subwoofer level
Press [i VOL j] to adjust the volume of the speakers.
Press [i SUBWOOFER j] to adjust the subwoofer level.
BThe indicators blink from left to right (i) or from right to left (s).
≥The indicators will not blink when it has reached the maximum or minimum.
To mute the sound
Press [MUTE].
BThe indicators blink simultaneously while muting.
≥To cancel, press the button again or adjust the volume.
≥Muting is canceled if this unit is turned off.
Audio format indicator
Press [
VS] to indicate the audio format.
CThe current audio format is indicated for 4 sec.
Green: Dolby Digital
Red: DTS
Off: PCM or LPCM
≥The audio format status is also indicated for 4 sec if the audio format on the selected source (TV,
≥The Dolby Virtual Speaker (
VS) audio effect status is also indicated. (> 13)