Attaching this unit to a wall
6 Thread a cord (not supplied) through the wall mount bracket.
≥Use a cord which is capable of supporting over 20 kg (44.1 lbs).
A Rear of this unit
B Fall prevention cord (not supplied)
7 Attach the lock pins into the wall mount bracket.
≥The lock pins are designed to lock the wall mount brackets to the screws that this unit is attached to. Hence, preventing this unit from falling off the screws.
≥Keep the lock pins out of reach of children to prevent swallowing.
≥Insert the lock pins as illustrated in the image below.
≥Make sure that the lock pin does not get caught on the fall prevention cord.
ADo not insert the lock pin farther than this point.
8 Drive 2 screws (not supplied) into the screwing positions identified in step 4.
|
|
|
|
|
|
|
|
|
|
|
| | A At least 30 mm (13/16q) | |
|
|
|
|
|
|
|
|
|
|
| B ‰4.0 mm (5/32q) | |||
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| | C ‰7.8 mm to ‰9.4 mm (5/16q to 13/32q) | ||
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| D Wall |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| | E 5.0 mm to 6.0 mm (3/16q to 1/4q) | |
|
|
|
|
|
|
|
|
| ||||||
≥Take care when fixing this unit to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging this unit.
≥Keep the screws out of reach of children to prevent swallowing.
≥Be sure to use commercially available screws with nominal diameter of ‰4.0 mm (5/32q) suited to the wall surface material (wood, steel frame, concrete, etc.) and also capable of supporting over 20 kg (44.1 lbs) each for attaching this unit to the wall.
≥The position in the wall where the screw is to be attached should be capable of supporting over 20 kg (44.1 lbs).
≥Improper attachment may result in damage to the wall and this unit.
Installation Instructions
25