Panasonic SC-HTB10 Mount the unit securely onto the screws, Push the lock pins fully into place

Page 26

9 Mount the unit securely onto the screws.

AMove this unit so that the screw is in this position.

Be sure that both the wall mount brackets are securely attached to the screws.

If this unit is tilting forward, remove this unit from the screws and adjust by tightening the screws.

10 Push the lock pins fully into place.

 

ARear of this unit B Lock pin (supplied) C Screw (not supplied)

Be sure to attach both lock pins correctly.

11 Attach the cord to a wall with a screw (not supplied).

Keep the screws out of reach of children to prevent swallowing.

Check the strength of the installation location. The position in the wall where the screw is to be attached should be capable of supporting over 20 kg (44.1 lbs). If the strength at any of these positions is lacking, provide sufficient reinforcement.

e.g.

ARear of this unit

BFall prevention cord (not supplied)

26 C Screw eye (not supplied)

Image 26
Contents If you have any questions contact Included Installation InstructionsModel No. SC-HTB10 Button-type battery Lithium battery Refer Servicing to Qualified Service PersonnelModel Number Serial Number User memo Date of Purchase Dealer Name Dealer Address Telephone NumberTable of Contents Unit care AccessoriesClean this unit with a soft, dry cloth To dispose or transfer this unitControl reference guide Standby/on switch Power Í/IRemote control operation range Distance Main unit FrontWhile pressing the stopper B, pull out the battery holder Remote controlTo replace a button-type battery On the wall A rack § 1, 2 PlacementIf the TV’s remote control sensor is Blocked by this unit If it persists, move this unit further away from the TVPreparation Assembling the unitTo prevent the unit from falling Thread a cord not supplied through each wall mount bracketBasic connection with an ARC compatible TV ConnectionsConnection to a TV Hdmi cable not suppliedConnection from an Hdmi compatible device AC power supply cord connectionAC power supply cord supplied Saving energyTo adjust the volume/ subwoofer level Using this unitAudio source indicator Audio format indicatorChanging the audio effects Audio effectsVarious audio effects Linked operations with the TV Automatic input switchingWhat is Viera Link Hdavi Control? Speaker SelectionCompatible audio formats SpecificationsAudio information General operation TroubleshootingPower SoundViera Link Remote control codeChanging this unit’s settings TV AudioLimited Warranty Limits And Exclusions Limited WarrantyCarry-In or Mail-In Service One Panasonic Way, Secaucus, New JerseyFor hearing or speech impaired TTY users, TTY Product ServiceProduct information As of NovemberLimited Warranty only for Canada Panasonic Canada IncSafety Precautions Precautions for wall mount bracket installation Requests regarding handlingComponents Installation procedureNever use any other method than specified to install Attaching the wall mount bracketsConnections PlacementChecking the strength of the installation location Complete all the necessary connections to this unitThread a cord not supplied through the wall mount bracket Attach the lock pins into the wall mount bracketAttaching this unit to a wall Attach the cord to a wall with a screw not supplied Push the lock pins fully into placeMount the unit securely onto the screws Move this unit so that the screw is in this positionInstallation Instructions FCC Note F0410SA1005
Related manuals
Manual 28 pages 55.49 Kb