SpecificationsFunctions
Battery Pack | 18 V / NiCd / 1700 mAh |
|
|
Speed | 0 - 2,100 RPM / 3,000 BPM (No Load) |
|
|
Average | 205 |
Torque | 211 |
Drive | 1/2” Square Drive |
Bolt Capacity | 1/2” (13 mm) |
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
Instructions for putting
into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
| Housing, right & left |
Impact Anvil (6) | (24 & 28) |
| Forward/Reverse |
Trigger (27) | Lever (26) |
Battery Pack (35) | Handle |
|
Battery Pack
Release Button
Figure 1
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before adjusting tool or installing accessories.
Page 8 | For technical questions, please call | SKU 67845 |