DeWalt DC835KAR Important Safety Instructions for All Battery Chargers, Ipm, Date Code Position

Page 9

EN G L IS H

 

Wear eye protection.

IPM

Impact per minute.

DATE CODE POSITION

The Date Code, which also includes the year of manufacture, is printed into the housing surface that forms the mounting joint between tool and battery.

Example:

2011 XX XX

Year of Manufacture

Important Safety Instructions for All Battery Chargers

SAVE THESE INSTRUCTIONS: This manual contains important safety and operating instructions for the DE9130/DE9135 battery chargers.

Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.

DANGER: Electrocution hazard.

230 volts are present at charging terminals. Do not probe with conductive objects. Electric shock or electrocution may result.

WARNING: Shock hazard. Do not allow any liquid to get inside charger. Electric shock may result.

CAUTION: Burn hazard. To reduce the risk of injury, charge only DEWALT rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

CAUTION: Under certain conditions, with the charger plugged in to the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.

These chargers are not intended for any uses other than charging DEWALT rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.

Do not expose charger to rain or snow.

Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage to electric plug and cord.

Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution.

An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size.

Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.

Do not operate charger with damaged cord or plug — have them replaced immediately.

Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service center.

Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.

Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.

NEVER attempt to connect 2 chargers together.

The charger is designed to operate on standard 230V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger.

7

Image 9
Contents DC820 DC822 DC825 DC827 DC830 DC832 DC835 DC837 DC840 DC845 Copyright Dewalt Page Page Technical Data CongratulationsEN G L is H EC-Declaration of Conformity Definitions Safety GuidelinesEN G L I S H Machinery DirectiveElectrical Safety Work Area SafetyPersonal Safety Power Tool USE and CareBattery Tool USE and Care Safety Instructions for All Impact DrillsService Residual RisksImportant Safety Instructions for All Battery Chargers IPMDate Code Position Hot/Cold Pack Delay Charging Procedure figImportant Safety Instructions for All Battery Packs ChargersBattery Pack Battery Cap figLabels on Charger and Battery Pack Storage RecommendationsElectrical Safety Package ContentsDescription fig Belt Hook Optional Accessory fig Using an Extension CableVariable Speed Trigger Switch fig To Remove the Battery Pack from the ToolWorklight fig Forward/Reverse Control Button figQuick-Release Chuck fig Anvil With Detent Pin figOptional Accessories CleaningCharger Cleaning Instructions Protecting the EnvironmentDAY no Risk Satisfaction Guarantee Rechargeable Battery PackONE Year Free Service Contract ONE Year Full WarrantyPage Page Page N110986 09/11

DC825KAR, DC835KAR specifications

The DeWalt DC835KAR and DC825KAR are professional-grade cordless impact wrenches designed for heavy-duty applications in construction and automotive industries. These models are part of DeWalt’s growing line of high-performance power tools, renowned for their reliability and innovation.

The DC835KAR model boasts a powerful 18V motor that delivers a striking torque of up to 300 ft-lbs, making it ideal for loosening and tightening stubborn fasteners with ease. It features a 1/2-inch square drive with a detent pin, allowing for secure socket retention during use. The compact design of the DC835KAR enhances maneuverability, especially in tight spaces, while the lightweight build reduces user fatigue during extended operations.

On the other hand, the DC825KAR offers an impressive torque output capable of tackling a variety of tasks. The impact wrench features a variable speed trigger, giving users finite control over the speed and power delivery while working. Its 1/4-inch hex chuck allows for quick and easy bit changes, providing versatility when switching between applications. Both models come equipped with a built-in LED light to illuminate dark work areas, enhancing visibility and precision.

DeWalt has integrated advanced battery technology into these impact wrenches, utilizing lithium-ion batteries that deliver longer run times and reduced charge times. This innovative battery management system ensures consistent power delivery and extends tool life. The tools are compatible with DeWalt’s 18V battery platform, allowing users to interchange batteries with other tools within the same range, enhancing overall efficiency on the job site.

In terms of ergonomics, both the DC835KAR and DC825KAR sport a rubberized grip, which provides comfort and ensures a secure hold even during intense applications. The lightweight design also minimizes fatigue, allowing users to tackle challenging tasks without discomfort.

Overall, the DeWalt DC835KAR and DC825KAR impact wrenches are equipped with cutting-edge features and robust technologies that cater to professionals who demand performance, durability, and versatility. Their ability to deliver exceptional torque in a compact form makes them indispensable tools for any serious tradesperson. With DeWalt’s commitment to quality and innovation, these impact wrenches stand out as powerful allies for tackling the toughest fastening challenges.