Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Keep this manual and the receipt in a safe and dry place for future reference.
Important SAFETY
Information
In this manual, on the labeling, and all other information provided with this product:
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous
situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous
situation which, if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert
symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
CAUTION, without the safety alert
symbol, is used to address practices not related to personal injury.
WARNING Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
1.The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
2.Wear
3.Use only within rated torque range. Do not use for loosening.
4.Use as intended only. Do not use as hammer or pry bar. Do not use handle extension to increase force. Do not drop.
5.Inspect before every use; do not use if damaged or parts loose.
6.Keep away from children.
7.For your safety, service, calibration, and maintenance should be performed regularly by a qualified technician.
8.Use only sockets with the correct drive and rated to at least the torque that will be applied to it.
Torque | For technical questions, please call | Page 2 |
Wrenches |
|
|