632901-00 Iron 10/24/05 12:37 PM Page 5
Basic Soldering Tips
Note: The process of “tinning” the soldering tip is helpful to insure a good soldering joint. A tinned tip has a thin layer of solder applied to it and is free of solder flux. “Flux” is the chemical contained in most solder wire which helps to clean the area about to be joined. When purchasing solder check to see that it contains flux or else apply flux to the joint area as directed.
1.Set Craft Iron to Hi (II) and wait until Ready to Use Indicator shows solid “RED” indicating iron has reached desired temperature.
2.When working with small pieces, use the 3rd hand grippers to arrange the 2 pieces being soldered so they are in contact. Insure that the material under the grippers is heat resistant and will not be harmed by any excess solder. For larger pieces, insure that your workpiece is resting on a heat resistant surface to avoid heat damage to a table. etc.
3.Wipe the tip on the moistened sponge to remove old solder.
4.Touch solder to the hot tip to just coat or tin the tip.
5.Hold the soldering tip against the larger workpiece near the joint area. The objective is to heat the 2 work pieces until they are hot enough to melt the solder. In stained glass work, lightly touch the tip of the iron to the copper foiled seam.
6.Hold the solder against the workpiece near the joint, but not touching the soldering tip.
7.When the workpiece is hot enough, the solder will flow into the joint.
8.Remove the Craft Iron as soon as the solder flows.
Cleaning
Use only mild soap and a damp cloth to clean the tool. Many household cleaners contain chemicals which could seriously damage the plastic. Also, do not use gasoline, turpentine, lacquer or paint thinner, dry cleaning fluids or similar products. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
Centers or other qualified personnel. This tool contains no customer serviceable components.
Service Information
Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under
Full Two-Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black
&Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black
&Decker owned and authorized service centers are listed under
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustments should be performed by Black & Decker Service
5
Black & Decker (U.S.) Inc., | See | |
701 E. Joppa Rd. | ||
– Yellow Pages – | ||
Towson, MD 21286 U.S.A. | ||
for Service & Sales | ||
|