Safe Operation

www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++

01. Check the mains voltage.

Please make sure that the available mains voltage corresponds to that shown on the rating plate on the equipment.

02. Switch equipment on before placing into contact with workpiece. Always turn on the equipment before placing it into contact with the workpiece.

03. Keep your working area tidy.

Untidiness at your working area may lead to accidents. 04. Take surrounding influences into consideration.

Do not subject power tools to rain. Do not use power tools in a moist or wet environment. Ensure good lighting. Do not use power tools close to inflammable liquids or gases.

05. Protect yourself against an electric shock.

Avoid physical contact with earthed parts such as tubes, radiators, stoves, refrigerators. 06. Keep out of reach of children.

Keep other people away from your working area. 07. Store your tools in a safe place.

Tools not being used should be stored in a dry, high and closed place, out of the reach of children.

08. Do not overload your power tools.

Your work is safer and better if carried out within the indicated capacity ranges. 09. Use the correct power tool.

Do not use machines of insufficient capacity for heavy-duty work. Do not use tools for other purposes than those for which they are intended, for example do not use a manual circular saw for cutting tree trunks and timber.

10.Wear appropriate workwear.

Do not wear wide clothes or jewellery since they might be caught by mobile parts. When working in the open, rubber gloves and non-skid footwear is recommended. Wear a hair net if you have long hair.

11.Wear eye protection, protective mask and ear defenders.

For work which produces splinters, swarf or dust or when working overhead always wear eye protection, with an appropriate protective mask. When working in noisy conditions, wear ear defenders.

12.Connect the dust suction device.

If devices for the connection of dust suction equipment and collectors are available, ensure that these are connected and properly used.

13.Use cable only for such purposes for which it is intended.

Never carry the power tool by the cable. Do not use cable to disconnect the tool from the mains supply. Protect the cable against heat, oil and sharp edges.

14.Secure the work piece.

Use a fastening device or a vice to secure the work. This guarantees a safer hold than with a single hand and allows you to operate the power tool with both hands.

15.Avoid abnormal posture.

Get a firm stand and hold your balance at any time.

16.Service your tools carefully.

Keep your tools clean and sharp to be able to perform better and safer work. Observe the service instructions and the note regarding change of tools. Check the cable of the tool regularly and in case of damage, ask for professional repair. Check extension cables regularly and replace them if damaged. Keep handles dry and free of oil and grease.

17.Disconnect the mains plug.

When power tool is not used, before maintenance and when changing tools, such as saw blade, drill, hob.

18.Always remove tool keys.

Before switching on device, ensure that the keys and adjustment tools are removed.

19.Avoid unintended start.

Do not carry any tools connected to the mains supply with your finger on the switch . Ensure that the switch is off when plugging instrument into socket.

20.Extensions in the open.

Only use authorized and respectively marked extensions for use in the open.

21.Be attentive.

Pay attention to what you are doing. Act sensibly. Do not use the power tool if you are not fully concentrating.

22.Check the power tool for any possible damages.

Before further use of the power tool, the protection devices or any lightly damaged parts must be carefully examined. Check whether the mobile parts function correctly and do no jam or if any parts are damaged. All parts must be mounted correctly and meet all conditions to guarantee perfect operation of power tool. Any damaged protection devices and parts must be repaired professionally by a recognized expert workshop or exchanged, unless otherwise stipulated in the operation manual. Damaged switches must be replaced at an after-sales workshop. Never use power tools whose switches cannot be operated.

23.Make others aware of how to handle the equipment.

If you lend or hand over tools to another person make sure you explain how to handle the equipment. Always pass on this safety advice and the instructions for use.

24.Take care when working from ladders and scaffolds.

Special care must to be taken when working from ladders or scaffolds. Make sure they are correctly assembled and secured against slipping.

25.Attention!

Only use such accessories and auxiliaries that are listed in the operating instructions. Use of replacement tools other than those stipulated in the operating instructions or other accessories may entail the risk of injury for operator.

26.Have your power tool repaired by a professional electrician.

This power tool complies with the relevant safety regulations. Repair work may only be carried out by a professional electrician by using original spare parts; otherwise this may entail in accidents for the operator.