Safety advice / Before first use
Original accessories / attachments
Use only the accessories detailed in the operating instructions. The use of attachments or accessories other than those recommended here could lead to you suffering an injury.
Before first use
Fitting the helical spring
Insert the narrower end of the helical spring 3 into the opening of the multifunctional holder 7 . Ensure that the outwardly bent end of the helix points upwards and insert it into the recess provid- ed for it in the multifunctional holder 7 (see arrow in Fig. B).
Push the helical spring | 3 | into the opening as far as it will go. | |||
Turn the helical spring |
|
| clockwise to fix the multifunctional | ||
| 3 | ||||
holder | 7 | in place. |
|
|
Inserting / replacing soldering tips
CAUTION! DANGER OF BURNS! Allow the soldering pencil to heat up without a soldering tip.
Removal of a soldering tip 2 or a copper attachment 9 10 11 may only be done when the appliance has been switched off and the soldering tip or attachment has cooled down.
All soldering tips and attachments have a screw thread and can, therefore, be easily and quickly replaced on the soldering pencil 1 . Turn the soldering tip or attachment
GB/IE/CY
13