Parkside PLBS 30 manual Switching on and oﬀ, Third hand, Solder sponge

Page 13

Operation

Operation

Switching on and oﬀ

Switching on:

Insert the mains plug into a suitable mains socket.

Switching off:

Pull the plug out of the mains socket to switch oﬀ the device.

Third hand

CAUTION! DANGER OF BURNS! The clips on the third hand 5 can become hot while you are soldering the workpiece.

1.Fold out the third hand 5 upwards.

2.Rotate the clips 4 until they are oriented in the required direction.

3.Clamp the workpiece between the two clips 4 .

Solder sponge

CAUTION! The hot soldering tip 2 must never be placed in contact with a dry solder sponge 8 , otherwise the solder sponge may be damaged.

The solder sponge 8 is used to clean soldering tips.

Moisten the solder sponge 8 before you use it.

14 GB/IE/CY

Image 13

Contents Plbs Page Page Safety advice Table of contentsIntroduction Before ﬁrst useRisk of explosion Proper use Soldering iron with holder IntroductionIncluded items Features and equipmentTechnical information Electrical safety Workplace safetyPersonal safety Safety advice Always wash your hands immediately after soldering Careful handling and use of electrical power toolsOriginal accessories / attachments Safety advice / Before ﬁrst useFitting the helical spring Inserting / replacing soldering tipsThird hand Switching on and oﬀSolder sponge Soldering Clean the soldering tip 2 on the moist solder spongeMaintenance and cleaning Operation / Maintenance and cleaningService centre / Warranty Disposal Warranty / DisposalDeclaration of conformity / Producer Disposal / Declaration of conformity / ProducerKompernass Gmbh