Parkside PLBS 30 manual Personal safety

Page 9

Safety advice

c)Use a residual current device (RCD) for protection if operating the electrical power tool in a moist envi- ronment is unavoidable. The use of an RCD reduces the risk of electric shock.

d)Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the

device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads increase the risk of electric shock.

e)Do not operate the device if the mains lead or mains plug is damaged.

WARNING! A damaged mains lead presents a serious danger to life from electric shock.

f)Always keep the mains lead out of the operating area and run it away from the rear of the device.

g)Always pull out the mains plug if you are about to leave the device unattended or wish to carry out any tasks on the device.

3. Personal safety

a)Children or persons who lack the knowledge or ex- perience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or in- struction by a person responsible for their safety. Children must never be allowed to play with the device.

b)Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of

10 GB/IE/CY

Image 9
Contents Plbs Page Page Safety advice Table of contentsIntroduction Before first useRisk of explosion Proper use Soldering iron with holder IntroductionFeatures and equipment Included itemsTechnical information Electrical safety Workplace safetyPersonal safety Safety advice Always wash your hands immediately after soldering Careful handling and use of electrical power toolsOriginal accessories / attachments Safety advice / Before first useFitting the helical spring Inserting / replacing soldering tipsSwitching on and off Third handSolder sponge Soldering Clean the soldering tip 2 on the moist solder spongeMaintenance and cleaning Operation / Maintenance and cleaningService centre / Warranty Disposal Warranty / DisposalDeclaration of conformity / Producer Disposal / Declaration of conformity / ProducerKompernass Gmbh