| TABLE OF CONTENTS |
|
■ Table of Contents / Introduction | 2 | |
■ | General Safety Rules | |
■ | Specific Safety Rules | |
■ | Symbols | |
■ | Features | |
■ | Product Specifications | 8 |
■ | Operation | |
■ | Maintenance | |
■ Parts Ordering / Service | 18 | |
| INTRODUCTION |
|
DOUBLE INSULATION
Your Ryobi power tool is double insulated. This means you are separated from the tool's electrical system by two complete sets of electrical insulation. This extra layer of insulation is intended to protect the user from electri- cal shock due to a break in the wiring insulation. All ex- posed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.
IMPORTANT
Servicing of a tool with double insulation requires ex- treme care and knowledge of the system and should be performed only by a qualified service technician. For service we suggest you return the tool to your nearest RYOBI AUTHORIZED SERVICE CENTER for repair. When servicing use only identical Ryobi replacement parts.
WARNING:
The double insulated system is intended to protect the user from shock resulting from a break in the tool's internal wiring. Observe all normal safety precautions related to avoiding electrical shock.
WARNING:
Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save operator's manual and review frequently for continuing safe operation, and instructing others who may use this tool.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.
Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.
2