Additional Safety Rules For Planers

ADDITIONAL SAFETY RULES

FOR PLANERS

1.DO NOT operate the tool until it is completely assembled and installed according to the instructions.

2.IF YOU ARE NOT thoroughly familiar with the operation of planers, obtain advice from your supervisor, instructor or other qualified person.

3.MAKE SURE wiring codes and recommended electrical connection instructions are followed, and that the machine is properly grounded.

4.MAKE all adjustments with the power off.

5.DISCONNECT machine from power source when making repairs.

6.NEVER turn the planer “ON” before clearing the table of all objects (tools, scraps of wood, etc.).

7.KEEP knives sharp and free of all rust and pitch.

8.NEVER perform any planing operation with guard removed.

9.KEEP fingers and hands away from cutting area.

10.NEVER reach under the cutterhead while the machine is running.

11.KEEP fingers and hands away from chip exhaust opening. The cutterhead rotates at extremely high speeds.

12.NEVER feed the work into the outfeed end of machine.

13.ADEQUATELY support the workpiece at all times.

14.WHEN planing extra long workpieces, MAKE SURE the material is supported at the infeed and outfeed end at table height.

15.NEVER start the machine with the workpiece in contact with the cutterhead.

16.MAKE SURE the workpiece is free from nails and other foreign objects which could cause injury or damage to the blades.

17.MAKE SURE the blades are properly secured in the cutterhead, as explained in the instruction manual, be- fore turning on power.

18.ALWAYS allow the cutterhead to reach full speed before using.

19.IF DURING OPERATION there is any tendency for the tool to tip over, slide or walk on the supporting surface, MAKE SURE TOOL IS SECURED TO THE SUPPORTING SURFACE.

20.DO NOT perform planing operations on material shorter than 10 inches, narrower than 3/4 inches, wider than 12 inches, or thinner than 3/16 inches.

21.BEFORE LEAVING the machine, make sure the work area is clean.

22.SHOULD any part of your planer be missing, damaged or fail in any way, or any electrical component fail to perform properly, shut off switch and remove plug from power supply outlet. Replace missing, damaged or failed parts before resuming operation.

23.IMPORTANT: When the tool is not in use, the switch should be locked in the “OFF” position to prevent unauthorized use.

24.ADDITIONAL INFORMATION regarding the safe and proper operation of this product is available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201 in the Accident Prevention Manual for Industrial Operation and also in the Safety Data Sheets provided by the NSC. Please also refer to the American National Standards Institute ANSI 01.1 Safety Requirements for Woodworking Machinery and the U.S. Department of Labor OSHA 1910.213 Regulations.

22-540 specifications

The Delta 22-540 is a powerful and versatile woodworking tool designed for both amateur and professional woodworkers. Known for its robust construction and reliability, this 13-inch thickness planer features a host of technologies and characteristics that make it a standout choice in any workshop.

At the heart of the Delta 22-540 is its powerful 15-amp motor, which delivers impressive performance and allows users to tackle a range of materials with ease. The motor runs at a speed of 20,000 RPM, enabling smooth and efficient operation for various wood thicknesses. This ensures that users can achieve a uniform finish and consistent results every time.

One of the most notable features of the Delta 22-540 is its precision-ground, cast iron table. This heavy-duty tabletop provides a stable work surface that minimizes vibration during operation, which is essential for achieving a smooth finish. Additionally, the table has a dual adjustment system that allows for easy height adjustments, ensuring users can set the thickness precisely to their requirements.

The Delta 22-540 is equipped with high-quality knives that are easy to replace, ensuring longer tool life and enhanced cutting performance. The knife-edge design optimizes wood chip evacuation, which not only improves cutting efficiency but also reduces the likelihood of snipe, making it an ideal choice for users concerned about maintaining the quality of their wood surfaces.

Safety features are also a priority in the design of the Delta 22-540. The planer comes with a blade guard that protects users from accidental contact with the cutting blades. Furthermore, the onboard dust port promotes a cleaner workspace by connecting to a dust collection system, capturing debris and chips efficiently.

In terms of portability, the Delta 22-540 is designed with a sturdy yet lightweight frame, allowing for easy movement around the workshop. Its compact size makes it suitable for small spaces without sacrificing performance or capability.

Overall, the Delta 22-540 thickness planer combines power, precision, and user-friendly features, making it an excellent addition to any woodworking setup. Its blend of advanced technologies, durability, and safety characteristics ensures that woodworkers can complete their projects with confidence and ease, elevating their craftsmanship to the next level. Whether you are flattening rough lumber or bringing life back to old wood, the Delta 22-540 stands out as a reliable tool to achieve high-quality results.