Delta 22-540 instruction manual Operating Controls and Adjustments, Starting Stopping Planer

Page 9

OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND

STOPPING PLANER

The “ON/OFF” switch (A) Fig. 13, is located on the front of the planer motor. To turn the machine “ON”, move the switch toggle (B) to the up position. To turn the switch “OFF”, move the switch toggle (B) to the down position.

LOCKING SWITCH IN

THE “OFF” POSITION

IMPORTANT: When the tool is not in use, the switch should be locked in the “OFF” position to prevent unauthorized use. Grasp the switch toggle (B) and pull it out as shown in Fig. 14. With the switch toggle removed, the switch will not operate. However, should the switch toggle (B) Fig. 14, be removed while the machine is running, the switch (A) can be turned “OFF” once, but cannot be restarted without reinserting the switch toggle.

RAISING AND LOWERING HEAD ASSEMBLY

The head assembly (A) Fig. 15, contains the cutterhead feed rolls, chip deflector and motor. Raising and lowering the head assembly controls the depth-of-cut on your planer. To raise or lower the head assembly, rotate the raising and lowering handle (B). NOTE: One revolution of the handle will move the cutterhead up or down approximately 5/64 . An English/metric scale (C) and pointer (D) is located on the side of the planer for ease in setting the height of the cutterhead.

RECOMMENDED

DEPTH-OF-CUT

A dual English/Metric scale and pointer, located at the right front of the machine, indicates the thickness of the workpiece. NOTE: One revolution of the raising and lowering handle (B) Fig. 15, will move the cutterhead up or down 5/64 .

A 3/32 depth-of-cut can be made in soft woods on stock 8 wide and in hard woods on stock up to 7 wide. See chart Fig. 16.

For 10 and 12 wide soft wood, we recommend a maxi- mum depth-of-cut of 1/16 . For 10 and 12 wide hard wood, a maximum depth-of-cut of 3/64 is recommended. IMPORTANT: A 3/32 DEPTH-OF-CUT

CAN BE MADE IN 10 AND 12 WIDE SOFT AND HARD WOODS. HOWEVER, CONTINUOUS OPERATION AT THIS CUTTING DEPTH CAN CAUSE PREMATURE MOTOR FAILURE.

9

A

B

Fig. 13

A

B

Fig. 14

AB

D

C

 

 

 

 

Fig. 15

 

 

 

 

 

 

 

 

OF CUT

3/32

 

 

 

 

 

1/16

 

 

 

SOFT WOOD

DEPTH

 

 

 

HARD WOOD

 

 

 

 

 

 

 

 

 

 

1/32

 

 

 

 

 

 

2

4

6

8

10

12

 

 

WIDTH OF STOCK

 

 

 

 

 

 

 

Fig. 16

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Portable Planer Always Wear EYE Protection Safety RulesAdditional Safety Rules For Planers Power Connections Connecting Tool to Power SourceMinimum Gauge Extension Cord Extension CordsUnpacking and Cleaning Assembly Instructions Assembling Raising and Lowering HandleLowering Extension Tables Assembling Chip Deflector Fastening Planer to Supporting SurfaceLocking Switch OFF Position Operating Controls and AdjustmentsRaising and Lowering Head Assembly Starting Stopping PlanerStoring the Power Cord Adjusting KnivesLeveling Extension Tables Replacing and Resetting Knives Lifting Straps OperationsMaintenance Brush Inspection ReplacementLubrication Accessories Page Page Maryland

22-540 specifications

The Delta 22-540 is a powerful and versatile woodworking tool designed for both amateur and professional woodworkers. Known for its robust construction and reliability, this 13-inch thickness planer features a host of technologies and characteristics that make it a standout choice in any workshop.

At the heart of the Delta 22-540 is its powerful 15-amp motor, which delivers impressive performance and allows users to tackle a range of materials with ease. The motor runs at a speed of 20,000 RPM, enabling smooth and efficient operation for various wood thicknesses. This ensures that users can achieve a uniform finish and consistent results every time.

One of the most notable features of the Delta 22-540 is its precision-ground, cast iron table. This heavy-duty tabletop provides a stable work surface that minimizes vibration during operation, which is essential for achieving a smooth finish. Additionally, the table has a dual adjustment system that allows for easy height adjustments, ensuring users can set the thickness precisely to their requirements.

The Delta 22-540 is equipped with high-quality knives that are easy to replace, ensuring longer tool life and enhanced cutting performance. The knife-edge design optimizes wood chip evacuation, which not only improves cutting efficiency but also reduces the likelihood of snipe, making it an ideal choice for users concerned about maintaining the quality of their wood surfaces.

Safety features are also a priority in the design of the Delta 22-540. The planer comes with a blade guard that protects users from accidental contact with the cutting blades. Furthermore, the onboard dust port promotes a cleaner workspace by connecting to a dust collection system, capturing debris and chips efficiently.

In terms of portability, the Delta 22-540 is designed with a sturdy yet lightweight frame, allowing for easy movement around the workshop. Its compact size makes it suitable for small spaces without sacrificing performance or capability.

Overall, the Delta 22-540 thickness planer combines power, precision, and user-friendly features, making it an excellent addition to any woodworking setup. Its blend of advanced technologies, durability, and safety characteristics ensures that woodworkers can complete their projects with confidence and ease, elevating their craftsmanship to the next level. Whether you are flattening rough lumber or bringing life back to old wood, the Delta 22-540 stands out as a reliable tool to achieve high-quality results.
Top Page Image Contents