SECTION 3: CIRCUIT REQUIREMENTS
G9967/G9967Z G9740/G9740Z
The Model G9967/G9967Z Planer is prewired with a 5 HP 220V
Total Amperage Draw | 39 amp | |
Recommended Circuit Breaker | 40 amp | |
Recommended Plug and Receptacle | ....... | |
Cord |
The planer must be connected to a dedicated circuit. It should not share a circuit with any other machine. If frequent circuit failure occurs when using the planer, contact our Service Department.
In addition, you may also
Figure 1. Typical 6-50 plug and receptacle.
The Model G9740/G9740Z is prewired with a 71⁄2 HP 220V 3-phase motor, which may be rewired to 440V. Please use the following specs preparing your shop for the machine, and always have the wiring inspected by licensed electrician before operating your machine.
Total Amperage Draw at 220V | .............. 26 amp |
Circuit Breaker at 220V | 30 amp |
Plug and Receptacle at 220V | |
Total Amperage Draw at 440V | .............. 13 amp |
Circuit Breaker at 440V | 15 amp |
Plug and Receptacle at 440V | |
Cord |
The planer must be connected to a dedicated circuit. It should not share a circuit with any other machine. If frequent circuit failure occurs when using the planer, contact our Service Department.
In addition, you may also
Figure 2. Typical L15-30 plug and receptacle.
Extreme Duty Planers |