Delta 22-610 instruction manual Carton Contents

Page 7

CARTON CONTENTS

The 22-610 planer is shipped complete in one container mounted to a shipping skid. Remove the wooden crate from around the machine. The planer is shipped with the motor, motor pulleys and belts assembled to the machine. Fig. 2, illustrates the loose items supplied with the machine.

1.Planer

2.Cutterhead guard.

3.Dust chute

4.Knife guage

5.Open end wrenches

6.Hex wrenches

7.Gauge block

3

1

2

4

7

5

6

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gaso- line or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

7

Image 7

Contents 24 3/4 Planer Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsImportant Safety Instructions General Safety RulesFailure to Follow These Rules MAY Result in Serious Injury Additional Specific Safety RulesGrounding Instructions Power ConnectionsMotor Specifications Functional DescriptionCarton Contents Electrical Connections AssemblyAssembly Tools Required Unloading Positioning MachineAssembling Cutterhead Guard and Dust Chute Overload ProtectionFeed Roll Speed Controls OperationStarting and Stopping the Planer Table Raising Lowering ControlsANTI-KICKBACK Fingers Table RollersChecking and Adjusting Belt Tension CHECKING, Adjusting and Replacing Knives Leveling the Table Checking and Adjusting BED Roll Height Adjusting Pressure BAR Adjusting the Chipbreaker Adjusting Outfeed Roller Adjusting Spring Tension on Feed RollersAdjusting Table Height Scale Adjusting Chip DeflectorGauge Block Lubrication Troubleshooting MaintenancePARTS, Service or Warranty Assistance ServiceAccessories WarrantyPage Page Canadian PORTER-CABLE Delta Service Centers