G9741/G9961Grounding
The Model G9740/G9740Z Planer is prewired with a 10 HP
Total Amperage Draw at 220V | .............. 32 amp |
Circuit Breaker at 220V | 35 amp |
Plug and Receptacle at 220V | |
Total Amperage Draw at 440V | .............. 15 amp |
Circuit Breaker at 440V | 20 amp |
Plug and Receptacle at 440V | |
Cord |
The planer must be connected to a dedicated circuit. It should not share a circuit with any other machine. If frequent circuit failure occurs when using the planer, contact our service depart- ment.
In addition, you may also
In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least resistance to disperse electric current. This tool is equipped with an electric cord that has an
This equipment must be grounded. Verify that any existing electrical out- let and circuit you intend to plug into is actually grounded. Under no cir- cumstances should the grounding pin from any
Extension Cords
We do not recommend the use of extension cords on 220V equipment. It is much better to arrange the placement of your equipment and the installed wiring to eliminate the need for exten- sion cords.
Figure 3. Typical 15-50 plug and receptacle.
Extreme Duty Planers |