SECTION 8: MAINTENANCE
Disconnect power to the machine when perform- ing any adjustments or maintenance. Failure to do this may result in seri- ous personal injury.
General
Periodic maintenance on your 20" Extreme Duty Planer Planer ensures its optimum performance. Make a habit of inspecting your planer each time you use it.
Check for the following conditions and repair or replace when necessary.
•Loose mounting bolts.
•Worn switch.
•Worn or damaged cords and plugs.
•Damaged
•Any other condition that could hamper the safe operation of this machine.
Table
The table and other
Tables can be kept
Lubrication
The Extreme Duty Planers have four lubrication points that need to be lubricated according to planer usage. Always lubricate more often under dusty/dirty conditions. As a general rule, lubricate as follows:
1.
Cleaning
Regularly blow out cabinet, feed rollers, chip breakers and cutterhead with compressed air (always wear safety glasses and a dust mask when doing this) and keep the dust port clear.
| Figure 20. |
Extreme Duty Planers |