Grizzly G0538 owner manual Quently

Burn	marks	on	1.	Using too fine of sanding grit.	1.	Use a coarser grit sanding sleeve.
workpiece.			2.	Using too much pressure.	2.	Reduce pressure on workpiece while sanding.
			3.	Work held still for too long.	3.	Do not keep workpiece in one place for too long.
Glazed	sanding		1.	Sanding wet stock.	1.	Dry stock properly before sanding.
surfaces.			2.	Sanding stock with high residue.	2.	Use different stock. Or, accept the characteristics of
						the stock and plan on cleaning⁄replacing belts⁄discs fre-
						quently.
Workpiece		fre-	1.	Sanding in direction of spindle rotation	1.	Move workpiece against direction of spindle rotation
quently gets pulled				(left-to-right).		(right-to-left).
out of your hand.			2.	Starting the workpiece on a leading cor-	2.	Start workpiece on a trailing corner.
				ner.

-18- G0538 Oscillating Spindle Sander