Grizzly G0505 instruction manual Safety Instructions For Power Tools

Page 4

SECTION 1: SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substi- tute for proper accident prevention measures.

Indicates an imminently hazardous situation which, if not avoided,

WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,

COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices.

This symbol is used to alert the user to useful information about NOTICE proper operation of the equipment.

Safety Instructions For Power Tools

1.KEEP GUARDS IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning on.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.NEVER USE IN DANGEROUS ENVI- RONMENT. Do not use power tools in damp or wet locations, or where any flam- mable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept at a safe distance from work area.

6.MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.

7.NEVER FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE RIGHT TOOL. Do not force tool or attachment to do a job for which it was not designed.

-2-

G0505 1212" Lean & Mean Portable Planer

Image 4
Contents 121⁄2 Lean & Mean Portable Planer Page Table Of Contents Safety Safety Instructions For Power ToolsLength AMP Rating 25ft 50ft 100ftAdditional Safety Instructions For Portable Planer Introduction Circuit Requirements 110V OperationGrounding Extension CordsControls & Features IdentificationUnpacking SET UPPiece Inventory Hardware Recognition Chart Clean Up Site ConsiderationsTo attach the handle assembly Mounting to Bench Handle AssemblyTo mount the planer Chip Deflector Test Run To secure the chip deflectorReset Button ON/OFF SwitchOperations Depth Of Cut Planing TipsWood Types Pitch & Glue Build-up Wavy SurfaceChip Marks or Indentations General MaintenanceKnife Sharpening MotorBelt To replace the beltFeed Rollers To clean the feed rollersLubrication Service Adjustments Knife SettingIf adjustment is necessary, proceed as fol- lows Extension WingsTo install and adjust the knives Reference Info Machine Data Sheet G0505 12 1⁄ 2 Lean & Mean Portable Planer Description G0505 121⁄2 Lean & Mean Portable Planer Motor Assembly G0505 12 1⁄ 2 Lean & Mean Portable Planer Base Assembly Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WACall Today For a Free Full Color Catalog