Harbor Freight Tools 41921, 10" Auto Planer manual Sku

Page 3

. Keep work area clean. Cluttered areas invite injuries.

3.Observe work area conditions. Do not use tools in damp, wet, or poorly lit locations. Don’t ex- pose to rain. Keep work area well lit. Do not use electrically powered equipment in the presence of flammable gases or liquids.

4.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or equipment.

5.Store idle equipment. When not in use, tools must be locked up in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

6.Do not force the tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s capacities.

7.Use the right tool for the job. Do not use a tool for a purpose for which it was not intended.

8.Dress properly. Do not wear loose clothing or jewelry, as they can be caught in moving parts. Non-skid footwear is recommended. Wear restrictive hair covering to contain long hair. Always wear appropriate work clothing.

9.Use eye, ear, and breathing protection. Always wear ANSI approved impact safety goggles if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. Use ANSI approved ear protection when working in a loud or noisy environment.

10.Do not abuse the power cord. Protect the power cord from damage, either from impacts, pulling or corrosive materials. Do not yank machine’s cord to disconnect it from the receptacle.

11.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across run- ning machine.

1. Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect power cord periodically and, if dam- aged, have it repaired by an authorized technician. Inspect all hydraulic seals for leaks prior to use. Control handle and power switch must be kept clean, dry, and free from oil and grease at all times.

13.Remove adjusting keys and wrenches. Be sure that keys and adjusting wrenches are removed from the tool or machine work surface before operation.

14.Avoid unintentional starting. Be sure that you are prepared to begin work before turning the start switch on.

15.Stay alert. Watch what you are doing. Do not operate this machine when you are tired.

16.Do not operate this machine while under the influence of alcohol, drugs, or prescription medicines.

17.Check for damaged parts. Before using any tool, any part that appears damaged should be care- fully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts, any broken parts or mounting fixtures, and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn on and off properly.

18.Replacement parts and accessories. When servicing, use only identical replacement parts in- tended for use with this tool. Replacement parts are available from harbor freight tools. Use of any other parts will void the warranty.

SKU 41921

For technical questions, please call 1-800-444-3353.

Page

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Auto Planer Save this manual SpecificationsIncluded Accessories FeaturesSKU Unpacking Special Warnings when using this Planing MachineInstallation Electrical PowerFeet For technical questions, please call Completing AssemblyOperating the Power Switch Integral Circuit BreakerOperation Safety Check Prior to OperationPlan the best way to handle warped and bowed boards It is important to consider wood grain when planingSuggestions for Better Planing Select your wood with careMaintenance Adjusting the Cutting KnivesUnplugged before attempting any adjustments Unplug the machine before attempting any repairs TroubleshootingPart Description ’ty Please refer to Parts Diagram onPlease refer to Parts List on Motor Assembly Cutter Assembly#41921 10 Auto Planer Parts Diagram, Motor Assembly #41921 10 Auto Planer Parts Diagram, Cutter Assembly

41921, 10" Auto Planer specifications

The Harbor Freight Tools 10" Auto Planer, model number 41921, is a versatile and efficient tool designed for both hobbyists and professionals seeking to achieve precision in woodworking projects. This powerful machine offers an array of features that make planing boards and timber easier, quicker, and more accurate.

One of the standout features of the 10" Auto Planer is its robust motor, which delivers 15 amps of power. This enables the planer to handle a broad range of hardwoods and softwoods with ease, providing a smooth finish even on tough materials. With a maximum planing width of 10 inches, it accommodates a variety of board sizes, making it suitable for various applications, from furniture making to cabinetry construction.

The 10" Auto Planer boasts a cutting depth adjustment that allows users to set the depth of material removal with precision. This feature is critical for achieving the desired finish and thickness required for different projects. The planer can handle cuts up to 1/8 inch deep, ensuring efficient removal of material without excessive effort.

In terms of technology, the 41921 model incorporates a double-edged knife system, which increases the longevity of the cutting blades and enhances the quality of the cut. These reversible knives can be easily replaced, allowing users to maintain the tool's peak performance without significant downtime.

The design of the planer emphasizes user safety and ease of operation. It features automatic feed rollers that pull the material through the machine, ensuring consistent results on each pass. The integrated dust port helps keep the work area clean by minimizing wood shavings, making it easier to manage mess during and after use.

Additionally, the sturdy construction of the 10" Auto Planer ensures durability and stability. Its heavy-duty base minimizes vibrations, contributing to smoother operation and improved accuracy during planing.

Overall, the Harbor Freight Tools 10" Auto Planer, model 41921, combines power, precision, and user-friendly features to make woodworking projects more manageable. Whether you're a seasoned woodworker or just starting, this planer is an excellent investment for achieving professional-grade finishes in your woodworking endeavors.
Top Page Image Contents