Panasonic SC-EN27 manual Radio operations, Allocation settings, To improve reception

Radio operations

Radio stations can be tuned manually by selecting the station’s frequency or they can be preset into channels to make it easy to tune. You can preset up to 20 FM channels and up to 12 AM channels.

			DISPLAY	OPEN/
				CLOSE
		SLEEP
		1	2	3
To adjust the volume		CLOCK/	5	6
		4
		TIMER ADJ			Input using the numbered
		SET/CHECK
		TIMER			buttons
		7	8	9
		PGM/CLEAR			To select a 2-digit number
			0	=>10
					e.g. 11: [	10] → [1] → [1]
		-AUTO PRESET
0	50	MUSIC PORT
		TUNER/		CD
(Minimum)	(Maximum)
		BAND
					To adjust the volume
		VOL		VOL
		SOUND	LIVE	PLAY
		EQ	VIRTUALIZER MODE
		ALBUM

Allocation settings
	Auto	Main unit
Each country allocates broadcast bands according to their particular	tuning
system. You can change the AM step. The step is factory-set to 9 kHz, but
you can change it to receive broadcasts allocated 10-kHz steps. Any AM		Select “FM” or “AM”	Press and hold until the
frequencies preset in channels will be changed by this procedure. Preset			frequency starts changing
them again.			rapidly
		Remote control
		TUNER/	3		4
		BAND		u	i

1.Select the FM band with [TUNER/BAND].

2.Press and hold [TUNER/BAND] on the unit.

After a few seconds the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed.

To return to the original step, repeat the above steps.

Note

The preset memory will be initialized when you change the frequency step.

Select “FM” or “AM” Press and hold until the

frequency starts changing rapidly

•Auto tuning stops when it finds a station.

•To cancel auto tuning press the same button again.

Note

•Auto tuning may not function when there is excessive interference.

Perform once for FM stations and once for AM stations.

To improve reception

FM AM

Automatic presetting

The tuner presets the stations it can receive into channels in ascending order.

TUNER/

BAND

Select “FM” or “AM”	Press and hold until
	“AUTO” appears
Note

During automatic presetting, the memory indicator

( PGM ) flashes and the frequency scrolls. The memory indicator and channel numbers are displayed for a second when a station is preset.

The first station to be preset is displayed when presetting finishes.

Receive the radio stations after	Change the direction and location
connecting the antenna. Then
attach the antenna code on the wall	of the antenna.
or pillar in the good reception.

If noise is excessive in FM

You can improve FM reception by switching reception to monaural.

MONO

Press to turn the MONO

mode ON/OFF

Manual presetting

Preset the stations one at a time.

Tune to		Within 10 seconds
		1	2	3
the station
you want to		4	5	6
set as the		7	8	9
preset.	Enter preset mode		0	=>10
Note	PGM	Select a channel

The station occupying a channel is erased if another station is preset over that channel.

Manual	Main unit
tuning

Select “FM” or “AM”	Select the frequency
Remote control

TUNER/	3	4
BAND	u	i
Select “FM” or “AM”	Select the frequency

4

Selecting

channels Select “FM” or “AM” Select a channel

Select “FM” or “AM” Select a channel