Whirlpool SGS375H warranty Setting The Controls, Using The Self-Cleaning Cycle, Press, You See

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

1.Press AUTO CLEAN.

The clean indicator light will light up.

This will automatically set a 31⁄2-hour Self-Cleaning cycle.

NOTE: There will be a 30-minute cool-down

1⁄2 hour before the cycle is over.

PRESS YOU SEE ON

AUTO

CLEAN

2.Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the hour and minute pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time between 21⁄2-41⁄2hours shows on the display.

•Use 21⁄2 hours for light soil.

•Use 31⁄2-41⁄2hours for average to heavy soil.

PRESS YOU SEE ON

TIME

(example shows 4 1/2-hour cleaning time)

3.Start the oven.

The on and heat indicator lights will light up.

NOTES:

•Make sure the door is closed all the way. If the door is open even a little, it will not lock. If the door is closed, it will lock after you press

START/ENTER.

•Do not attempt to open the oven door while locking.

PRESS YOU SEE ON

START

ENTER

5 SEC

4.After the Self-Cleaning cycle starts:

The door locked indicator light will light up when the oven door locks.

5. After the Self-Cleaning cycle ends and the oven			YOU SEE	ON
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
Press OFF/CANCEL to clear the display.	PRESS
		OFF
	CANCEL

continued on next page

25