Removing The Oven Door, To clean the burners | Whirlpool SGS375H

SEALED SURFACE BURNERS AND COOKTOP (CONT.)

Alignment pin

CARING FOR YOUR RANGE

SEALED SURFACE BURNERS AND COOKTOP (CONT.)

To clean the burners:

1.Pull the burner cap straight up from the burner base.

2.Clean the burner cap with warm, soapy water and a sponge. You can also clean it with a mildly abrasive scrubbing pad or cleanser.

Do not clean the burner cap in a dishwasher or self-cleaning oven.

3.If the gas tube opening has become soiled or clogged, use a cotton swab or a soft cloth to clean the area.

4.If the ports are clogged, clean them with a straight pin. Do not enlarge or distort the

port. Do not use a wooden toothpick. If the burner needs to be adjusted, call a qualified technician for service.

5.After cleaning the gas tube opening and ports,

replace the burner cap. To replace the burner cap, make sure the alignment pins on

the burner cap are properly aligned with the burner base.

6.Turn on the burner to see if it will light. If the burner does not light after you have cleaned it, contact an authorized service technician. Do not service the sealed burner yourself.

REMOVING THE OVEN DOOR

For normal use of your range, you do not need to remove the door. However, if you find it necessary to remove the door, follow the instructions in this section.

NOTE: The oven door is heavy.

Before removing the door:

1.Use a putty knife or screwdriver and insert it at the bottom corner of the door stop clip.

2.Pry door stop clip free and remove from front frame hinge slot. Take care not to scratch porcelain.

3.Repeat procedure for other door stop clip.

Door removal	Door stop clip
pin hole

Range

Hinge	Front frame
hanger	hinge slot

30

Image 30

Whirlpool SGS375H Removing The Oven Door, To clean the burners, Sealed Surface Burners And Cooktop Cont, Door removal

Contents

Self-Cleaning Gas Range A NOTE TO YOU Please record your model’s information wDANGER wWARNING RANGE SAFETYTHE ANTI-TIP BRACKET wWARNING For self-cleaning ranges RANGE SAFETYIMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Automatic oven light switch p Gasket PARTS AND FEATURESCONTROL PANEL Surface burner marker shows which burner you are setting Using the control knobs USING YOUR RANGEUSING THE SURFACE BURNERS Burner heat settings In case of a prolonged power failure Using the right cookware makes aUSING THE SURFACE BURNERS CONT Home canning information Positioning racks and pans Rack placement for specific foodsUSING YOUR RANGE Extra oven rack position roasting rack BAKEWARE TYPE USING ALUMINUM FOILBAKEWARE CHOICES BEST USED FOR THE ELECTRONIC OVEN CONTROL Indicator lightsUsing the control lock Display/clock PRESS SETTING THE CLOCKUSING THE ELECTRONIC MINUTE TIMER YOU SEE To cancel the minute timer during the countdown STARTING/CANCELING A FUNCTIONUSING THE ELECTRONIC MINUTE TIMER CONT display counts down Front BAKING/ROASTINGRoasting meats and poultry Rear example for set temperature of 325F BAKING/ROASTING CONTSaving energy 7. After cooking, turn off the oven factory setting of “00” ADJUSTING THE OVEN TEMPERATURE CONTROLHow to determine the amount of adjustment needed example when making oven 10F cooler BROILING Front Rear6. After broiling, turn off the oven Broiling guidelines BROILING CONTTo custom broil at a lower temperature example shows broil at 325F RACK Broiling guidelines contAPPROXIMATE TIME MINUTES The bake indicator light will light up USING THE AUTO COOKING CONTROLTo start baking/roasting now and stop automatically Food Poisoning Hazard 2. Choose the bake setting USING THE AUTO COOKING CONTROL CONTTo delay start and stop automatically display counts down cook time example shows 30-minute The start time/delay indicator light will light upexample shows bake at 375F baking/roasting time THE OVEN VENT display counts down cooktime Replacing the storage drawer THE STORAGE DRAWERRemoving the storage drawer Lower slide rail Burn Hazard Do not touch the oven during the Self-Cleaning cycle BEFORE YOU STARTUSING THE SELF-CLEANING CYCLE Keep children away from oven during Self-Cleaning cycle SETTING THE CONTROLS USING THE SELF-CLEANING CYCLEexample shows 4 1/2-hour cleaning time HOW THE CYCLE WORKS SETTING THE CONTROLS CONTTo stop the self-cleaning cycle at any time Temperature CLEANING METHOD CLEANING CHARTCARING FOR YOUR RANGE Explosion Hazard Surface burners CLEANING CHART CONTCARING FOR YOUR RANGE Oven door glass is blue in color. If the SEALED SURFACE BURNERS AND COOKTOPCleaning the surface burners Porcelain burner cap Burner base SEALED SURFACE BURNERS AND COOKTOP CONT To clean the burnersREMOVING THE OVEN DOOR Before removing the door To replace REMOVING THE OVEN DOOR CONTTo remove while the door is removed from the range REMOVING THE OVEN DOOR CONT THE OVEN LIGHTTo replace the oven light Support pins OVEN/BROILER BURNER TROUBLESHOOTINGRANGE DOES NOT WORK SURFACE BURNERS COOKING RESULTS WHEN SELF-CLEANING YOUR OVENTROUBLESHOOTING DISPLAY MESSAGES REQUESTING ASSISTANCE OR SERVICE IF YOU NEED ASSISTANCE OR SERVICEIF YOU NEED REPLACEMENT PARTS assist you. When callingPage Page Page INDEX TOPICPAGE WARRANTY GAS RANGE WARRANTYLENGTH OF WARRANTY WHIRLPOOL CORPORATION WILL PAY FOR