Miller Electric AC Generator/Air Compressor manual TIG Gtaw Welding, Remote Controls

Genuine Miller Accessories (continued)

MIG/Flux Cored Welding (continued)	WC-24 Control #137 549
	Use with Spoolmatic 30A.
	XR™ Wire Feeders and Guns
	Push-pull system designed to handle
	difficult-to-feed soft alloy wires such as
	aluminum. See Lit. Index No. M/1.7,
	M/1.71, and M/1.73.
	TIG (GTAW) Welding

Remote Controls

RHC-14 Hand Control #129 340

Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x

3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug.

SuitCase™ 8RC Wire Feeder #194 938 SuitCase™ 12RC Wire Feeder #194 940 Lightweight, modular design and flexible enough to run a variety of wires up to 5/64 in diameter. Comes standard with remote voltage control. See Lit. Index No. M/6.5.

S-32SL Wire Feeder #109 294 Simple to use, but with all the features needed for heavy-duty applications up to 7/64 in wire diameter. See Lit. Index No. M/6.21.

Spoolmatic® 30A Spool Gun #130 831

Air-cooled, 200-amp, 1-lb spool gun for aluminum MIG. See Lit. Index No. M/1.73.

Dynasty® 200 Series

For premium portable AC/DC TIG arc quality. See Lit. Index No. AD/4.8.

HF-251 Series #042 388 HF-251D-1, 115 VAC High-frequency arc starter and stabilizer. See Accessory Lit. Index No. AY/5.0.

RFCS-14 HD Foot Control #194 744 Heavy-duty foot current and contactor control. Includes 20 ft (6 m) cord and 14-pin plug.

RMLS-14 #129 337

14-pin plug Momentary- and maintained- contact rocker switch for contactor control. Push forward for maintained contact and back for momentary contact. Includes 20 ft (6 m) cord.

RCC-14 Remote Contactor and Current Control #151 086 14-pin plug Rotary-motion fingertip control fastens to TIG torch using two Velcro® straps. Includes 28 ft (8.5 m) control cord.

Extension Cords for 14-Pin

Remote Controls

#122 973 25 ft (7.6 m) #122 974 50 ft (15.2 m) #122 975 75 ft (23 m)

5